Breville Coffee Maker E1 — What It Means & How to Fix It
E1 (along with E2/E3) is Breville's unrecoverable error family — the machine detected an internal fault it can't clear.
What this code means
Breville's BES920 / BES870 / BES880 manuals state clearly: E1, E2, or E3 on the LCD means an error that cannot be reset by the user. The prescribed action is to call Breville Consumer Support. These are control/thermal/system faults behind the sealed cabinet.
Breville's BES920 instruction manual groups E1, E2 and E3 together as an error that cannot be reset by the user and tells owners to call Breville Consumer Support. Other Breville espresso machines show different messages, so check the manual for your model number.
Most likely causes
| Cause | How likely | DIY-fixable? |
|---|---|---|
| Control-board / thermal-system fault | Very common | No — service only |
What you can try yourself
- Turn the machine to Standby, then OFF at outlet (some guides say turn dial to STANDBY).
- Do not attempt internal repair — cabinet is sealed.
- Call Breville Consumer Support with the exact code and model number.
When to call a technician
- Code persists after full power-off.
Typical professional repair cost: Service call / warranty claim — Breville directs users to support first.
Frequently asked questions
Can I reset E1/E2/E3 myself?
No — Breville's manual explicitly says 'cannot be reset by the user.' That's the point of these three codes.
Sources checked
Error meanings can vary by model. This guide was checked against the documentation above; use the manual for the model number on your own appliance when it differs.
Related Breville codes
- Breville Coffee Maker E2 Same E-family unrecoverable error — E2 indicates a control/thermal/system fault that requires service.
- Breville Coffee Maker E3 E3 is the third of Breville's unrecoverable LCD errors — service required.
More: all Breville coffee maker codes · all Breville codes · search by symptom