Frigidaire Refrigerator H or HI — What It Means & How to Fix It
Also shown as H, HI on some models.
H or HI is the high-temperature alarm — a compartment stayed too warm.
What this code means
Frigidaire's guide lists H/HI when a compartment exceeds ~55°F fresh / ~26°F freezer for an extended time. Causes: door left open, poor gasket, or cooling fault.
Frigidaire's own error-code guide says a blinking HI on the temperature display means the temperature is too high, usually after a door has been open too long. Displays vary between Frigidaire lines, so check your model's manual if the code looks different.
Most likely causes
| Cause | How likely | DIY-fixable? |
|---|---|---|
| Door left open | Very common | Yes — close fully |
| Dirty / weak gasket | Common | Yes — clean |
| Cooling-system fault | Less common | No — technician |
What you can try yourself
- Close doors firmly.
- Wipe gaskets clean; check for tears.
- Press CLEAR ALERTS to acknowledge.
- If alarm re-trips within hours, treat as cooling fault.
Seeing the symptom rather than the code? Refrigerator not cooling: checks that apply across brands.
When to call a technician
- Alarm returns repeatedly after acknowledgment.
Typical professional repair cost: Free if door/gasket; thermal diagnosis $200-400.
Frequently asked questions
How warm is too warm?
Frigidaire triggers at ~26°F freezer / ~55°F fresh-food for extended periods.
Sources checked
Error meanings can vary by model. This guide was checked against the documentation above; use the manual for the model number on your own appliance when it differs.
Related Frigidaire codes
- Frigidaire Refrigerator PF PF means the refrigerator lost power — a common alarm after outages, not a broken part.
- Frigidaire Dishwasher i20 The unit didn't drain properly — Frigidaire's filters and glass trap clog like any brand's, and the drain hose and disposal connection make up the rest of the usual story.
- Frigidaire Dishwasher i40 Food soil has built up in the sump and filter to the point water can't circulate freely, and Frigidaire's own remedy is to pull the glass trap and filter and rinse them clean.
- Frigidaire Dishwasher CL The control hasn't sensed the door fully shut and latched, so it won't start the cycle — usually a door left a touch ajar, an item poking past the tub, or a strike knocked out of line.
More: all Frigidaire refrigerator codes · all Frigidaire codes · search by symptom