Black+Decker Error Codes

Pick the code your Black+Decker appliance is showing. Each page explains what the code means, the most likely causes ranked by probability, and which fixes are safe to try before calling a technician.

Black+Decker Washer Codes

• E1 Your Black+Decker washer didn't fill in time — E1 appears after about 30 minutes of filling without reaching the set level, nearly always a supply problem.
• E3 Your Black+Decker washer shows E3 when the spin has gone out of balance three times — open the lid, spread the wet load evenly and make sure the machine sits level.
• E4 Your Black+Decker washer can't drain — E4 appears when draining takes over 10 minutes or the tub can't empty completely, usually a kinked or badly placed drain hose or a clogged filter.
• E2 Your Black+Decker washer shows E2 when the top lid is open — close the lid fully and the cycle can carry on.
• E5 Your Black+Decker washer shows E5 when the water has filled past its preset level — turn off the taps, and call the manufacturer's service line as the manual directs.