Bosch Oven e011 — What It Means & How to Fix It
e011 is the touch-sensor fault on the oven control panel. Bosch's path: clean and dry the panel, breaker off five minutes, then test.
What this code means
On Bosch freestanding ranges, e011 reports a touch sensor failure on the oven control panel itself — a key or zone of the touch surface misbehaving. Bosch's official steps treat it like the interface alarm it is: clean the control panel and wipe it dry, then run the five-minute breaker reset, and only call for service if it survives all of that.
Bosch's freestanding-ranges page spells out this exact sequence, consistent with how the brand handles touch-panel faults across ranges and wall ovens. Panel dryness is step one because condensation fools touch sensors.
Most likely causes
| Cause | How likely | DIY-fixable? |
|---|---|---|
| Dirty or greasy touch surface confusing the sensor | Common | Yes — clean and dry |
| Condensation on the panel | Common | Yes — wipe dry |
| One-off sensor glitch | Occasional | Yes — breaker reset |
| Touch film failure | Less common | No — technician job |
What you can try yourself
- Clean the oven control panel with a soft damp cloth, then wipe it completely dry.
- Switch the range off at the breaker and wait five minutes.
- Switch the breaker on and test each touch key across the panel.
- If e011 returns only on one zone, that's a useful clue for the technician — note it.
- Persistent e011 on a clean, dry panel is a service call; the touch film is a sealed part.
When to call a technician
- e011 returns on a spotless, dry panel after the full reset.
- Keys respond without contact, or stop responding entirely in one area.
- Burn marks or discoloration under the control panel surface.
Typical professional repair cost: Cleaning and reset are free. Touch-panel replacement is a typical range-interface job — quoted by your service partner.
Frequently asked questions
Why does cleaning matter for a 'touch sensor failure'?
Touch sensors read capacitance — grease, moisture, or dried residue changes the reading and looks like a failing sensor. Bosch lists the clean-and-dry step first for exactly that reason.
If one key sticks but others work, is the panel dying?
Possibly — a single failing zone can announce the whole touch film's decline. The dry-panel reset is worth the two minutes first; after that, let a technician test the board.
Sources checked
Error meanings can vary by model. This guide was checked against the documentation above; use the manual for the model number on your own appliance when it differs.
Related Bosch codes
- Bosch Oven E11 E11 is the touch-control code — the panel read something it didn't expect, and condensation on a cold panel is the classic trigger. Dry it, power-cycle, retry.
- Bosch Oven e005 e005 is a communication fault between the range's user interface and its power board. The five-minute breaker reset is the documented first step.
- Bosch Oven E100 E100 is the range's general electronics-fault message. Run the documented five-minute breaker reset once — persistent E100 belongs to a technician.
- Bosch Oven e101 e101 is the temperature-sensor fault — the oven's probe isn't reading correctly. Bosch's steps: verify the power cord connection, then run the five-minute reset.
More: all Bosch oven codes · all Bosch codes · search by symptom