Farberware Dishwasher E1 — What It Means & How to Fix It
Your Farberware countertop dishwasher didn't fill in time — E1 is the water-intake ('longer inlet time') fault, usually a tap, faucet adapter, or hose issue.
What this code means
E1 on a Farberware dishwasher means water didn't arrive within the time the machine allows — its longer-inlet-time fault. On these countertop models that connect to a kitchen faucet, the adapter and supply are what to check before anything inside the unit.
Farberware's countertop dishwashers use the common compact pattern, fed through a faucet adapter. Some model guides also tie E1 loosely to the water-level/float sensor, so if the supply is clearly fine and E1 persists, the inlet valve or sensor is the next suspect — a service job.
Most likely causes
| Cause | How likely | DIY-fixable? |
|---|---|---|
| Faucet adapter loose or tap not fully open | Very common | Yes — no tools |
| Kinked or trapped inlet hose | Common | Yes — no tools |
| Low water pressure | Occasional | Partly — check the tap |
| Clogged inlet screen | Occasional | Yes — 10 min |
| Faulty inlet valve or level sensor | Less common | No — technician job |
What you can try yourself
- Check the faucet adapter is seated and the tap is open all the way.
- Straighten the inlet hose and clear any kinks between the tap and the unit.
- Disconnect the hose and rinse the small mesh screen at the inlet.
- Run the tap to confirm a normal flow and pressure.
- Unplug the dishwasher for a minute to reset, then run a short cycle to retest.
When to call a technician
- The adapter and hose are fine but the dishwasher won't fill.
- Water enters very slowly or only partway.
- E1 returns right after a reset with the tap fully open.
Typical professional repair cost: Inlet valve or level-sensor service on a Farberware dishwasher typically runs $100—$200 including labor.
Frequently asked questions
What does E1 mean on a Farberware dishwasher?
Water didn't come in fast enough before the fill timer expired — the longer-inlet-time fault. Check the faucet adapter, the inlet hose, and the inlet screen first; those cause most E1 cases on countertop models.
My Farberware countertop dishwasher shows E1 — what first?
The faucet adapter. These models depend on that quick-connect to the tap, so a loose or half-open adapter is the most common reason water doesn't arrive in time.
Could low pressure trigger E1?
Yes. If the supply is weak the dishwasher may not fill before its timer runs out. Test the tap; poor flow there too means the household supply, not the dishwasher.
Related Farberware codes
More: all Farberware dishwasher codes · all Farberware codes · search by symptom