Samsung Range C-F2 — What It Means & How to Fix It
Also shown as CF2 on some models.
C-F2 is Samsung's touch-to-control communication fault: a communication problem between the touch IC and the main or sub microcontroller. Restart, then a 30-second power off.
What this code means
C-F2 is a communication fault. Samsung's official page defines it as occurring when a communication problem is maintained between the Touch IC and the Main or Sub micom (microcontroller) — the touch panel's chip and the oven's brainboards stop talking reliably. The display can freeze, keys may ignore presses, and the oven holds operation. Samsung's fix is the standard two-step: turn the oven off and restart it, and if the code continues, switch the power off for 30 seconds or more and then reconnect.
Samsung's official information-code page lists C-F2 with the meaning 'occurs when a communication problem is maintained between the Touch IC and Main or Sub micom' and the restart-then-30-second-power-off routine. The model number is on the frame behind the storage drawer.
Most likely causes
| Cause | How likely | DIY-fixable? |
|---|---|---|
| One-off communication loss after a power blip | Very common | Yes — restart and power off |
| Moisture or a dirty touch panel disrupting the touch IC | Common | Yes — clean and dry |
| Display-to-main harness or connector issue | Occasional | No — technician job |
| Failed touch IC or control board | Less common | No — technician job |
What you can try yourself
- Turn the oven off and restart it — Samsung's own first step for C-F2.
- If the code continues, switch the power off for 30 seconds or more, then reconnect it.
- Clean and dry the touch panel — moisture on the glass is a known disruptor of the touch circuit.
- A C-F2 that returns after the routine needs a technician to test the display-touch board, its harness, and the main control.
When to call a technician
- C-F2 returns every power-on, or the display stays frozen and unresponsive.
- Keys on part of the panel work while others ignore presses.
- The oven won't start or respond while the code shows.
Typical professional repair cost: No cost if a reset clears it; touch-panel or control-board replacement typically runs $150–$400 including labor.
Frequently asked questions
What is the 'Touch IC' in C-F2?
It's the chip on the touch-control board that translates your presses into signals for the oven's main microcontroller. C-F2 means that link is having trouble keeping up.
Why clean the panel for a communication code?
Water or grime across the touch glass can scramble the signals the Touch IC sends, which looks exactly like a communication problem. Samsung's own fix keeps it simple: restart, power off, and clean.
Is C-F2 dangerous if the oven is mid-cycle?
No — the code holds controlled operation rather than risking heating you can't command. Let the cycle cancel, then run the reset routine once the display responds.
Sources checked
Error meanings can vary by model. This guide was checked against the documentation above; use the manual for the model number on your own appliance when it differs.
Related Samsung codes
- Samsung Range C-24 C-24 is Samsung's fast-temperature-rise warning: the cavity heated quicker than expected, most often because the vent on the back of the cooktop is covered.
- Samsung Range C-20 C-20 is Samsung's oven temperature sensor error: the sensor circuit reads open, shorted, or out of range, so the control board can't trust the cavity temperature.
- Samsung Range C-21 C-21 is Samsung's over-temperature code: the oven sensor detected the cavity hotter than the setpoint and shut heating down to protect the unit.
- Samsung Range C-F0 C-F0 is Samsung's communication error between the main control board and the display: the two stopped talking. A restart clears most cases; induction models have an official software-update fix.
More: all Samsung range codes · all Samsung codes · search by symptom