Fisher & Paykel Range A2 — What It Means & How to Fix It
A2 on a Fisher & Paykel oven means the door couldn't lock when Self Clean started. Cycle the power and try again with the door firmly shut.
What this code means
A2 is a door-lock alert on F&P convection ovens: you started Self Clean, but the oven couldn't lock the door. The manual's fix is a power cycle at the wall (once the oven is cool), a short wait so the lock returns to its starting position, and trying Self Clean again with the door closed firmly. If A2 keeps coming back, the lock mechanism needs a service visit.
Documented in the OB60SD convection-oven user guide: 'A2 Door lock error: the door cannot be locked after you have started Self Clean', with the power-cycle and close-the-door-firmly steps.
Most likely causes
| Cause | How likely | DIY-fixable? |
|---|---|---|
| Door not fully closed when Self Clean started | Very common | Yes — no tools |
| One-off lock glitch | Common | Yes — power cycle |
| Something obstructing the door or its latch | Occasional | Yes — check and clear |
| Failing door-lock mechanism | Less common | No — technician job |
What you can try yourself
- Turn the oven off and let it cool; only then switch the power off at the wall (or isolating switch) and back on.
- Wait about ten seconds so the door lock can return to its start position.
- Close the door firmly, making sure nothing is jammed in the door or the latch.
- Try starting Self Clean again.
- If A2 returns, note the code and book a service visit for the lock mechanism.
When to call a technician
- A2 returns every time Self Clean is attempted.
- The door visibly won't pull fully shut.
Typical professional repair cost: Free if the door was just ajar; a door-lock service call typically runs $150–$300.
Frequently asked questions
What does A2 mean on a Fisher & Paykel oven?
It's the door-lock error — the oven couldn't lock the door to start Self Clean. Power-cycle the oven and retry with the door closed firmly, as the manual suggests.
Why does my oven want to lock the door at all?
Self Clean reaches temperatures that make it unsafe to open the door mid-cycle, so the oven locks it first. A2 simply means that lock didn't engage before the cycle began.
A2 keeps appearing — is it safe to skip Self Clean?
You can still cook normally — A2 relates to the lock for Self Clean, not to baking. But a lock that won't engage is worth fixing before you need that function.
Sources checked
Error meanings can vary by model. This guide was checked against the documentation above; use the manual for the model number on your own appliance when it differs.
Related Fisher & Paykel codes
- Fisher & Paykel Range A1 A1 on a Fisher & Paykel oven means the oven overheated and locked down heating. Let it cool completely — the alert clears by itself once it has.
- Fisher & Paykel Range A3 A3 on a Fisher & Paykel oven means the door won't unlock after Self Clean finished. Power-cycle and gently press the door to help the latch release.
- Fisher & Paykel Dishwasher F1 F1 on a DishDrawer is the flood-switch code — the machine has detected water where it shouldn't be, and it will keep beeping until it's dealt with.
- Fisher & Paykel Dishwasher F3 F3 on a DishDrawer flags a temperature-sensor fault — and a very hot incoming water supply is the one cause you can check and fix yourself.
More: all Fisher & Paykel range codes · all Fisher & Paykel codes · search by symptom