KitchenAid Range PF — What It Means & How to Fix It
Also shown as PF ID 27, PF ID 30 on some models.
PF is a friendly reminder that power was interrupted — press Cancel to clear it and reset the clock if needed.
What this code means
The range lost power at some point — an outage, a tripped breaker, or a brown-out — and is telling you to acknowledge it. It is not a component fault.
PF appears on KitchenAid ranges with the Whirlpool-family electronics platform in its various display forms (including the PF ID 27 and PF ID 30 variants on some models). The exact 'clear' key can differ by model — your manual shows which button to press.
Most likely causes
| Cause | How likely | DIY-fixable? |
|---|---|---|
| A house power failure or outage | Very common | Press Cancel to clear |
| A brief power flicker or brown-out | Common | Press Cancel to clear |
| A tripped breaker or blown fuse | Occasional | Reset the breaker |
What you can try yourself
- Press the Cancel control on your range to clear the PF display.
- Reset the time-of-day clock if it is blinking or blank.
- If the breaker tripped, flip it off for a minute, back on, and monitor the range.
- If PF keeps reappearing without any actual outage, have the outlet or connection checked.
When to call a technician
- PF returns repeatedly with no visible outage
- The clock or display behaves erratically after clearing
- A breaker trips every time the range is used
Typical professional repair cost: $0
Frequently asked questions
Will PF affect how the oven cooks?
No — it only tells you power was interrupted. The oven works normally once you clear it and reset the clock.
Do I need to do anything special after clearing PF?
Just reset the time-of-day clock if needed. Some models keep their programmed settings through the outage; others need a quick re-set.
Is PF the same as an error code?
Not really — PF stands for power failure. It is an informational message, not a fault that requires parts or service.
Sources checked
Error meanings can vary by model. This guide was checked against the documentation above; use the manual for the model number on your own appliance when it differs.
Related KitchenAid codes
- KitchenAid Range F9 E0 F9 E0 points to an electrical wiring problem — most often a miswired power connection, usually caught in the first months after installation.
- KitchenAid Range LOC LOC means the range's control lock is active — the oven controls are disabled until you unlock them.
- KitchenAid Range SAB SAB means Sabbath mode is active — a convenience setting that keeps the oven usable during religious observance.
- KitchenAid Dishwasher F8E4 F8E4 is the dishwasher's leak-system error — the flood float in the base found water, and the machine stopped to protect your kitchen.
More: all KitchenAid range codes · all KitchenAid codes · search by symptom