Midea Washer E4 — What It Means & How to Fix It
Your Midea washer found the load lopsided during spin — E4 is the out-of-balance fault, cleared by spreading the laundry evenly and levelling the machine.
What this code means
E4 on a Midea washer means the basket couldn't balance for a high-speed spin. The load has bunched to one side, so the machine slows or stops rather than shake itself across the floor. It usually tries to redistribute with a little water first; E4 is what shows when that doesn't settle it.
A single heavy item — a bath mat, hoodie, or pair of jeans — is the classic trigger because it can't spread out on its own. On portable Midea washers, a machine that isn't sitting level on the countertop or floor will throw E4 even with a fair load.
Most likely causes
| Cause | How likely | DIY-fixable? |
|---|---|---|
| Laundry bunched to one side | Very common | Yes — redistribute |
| One heavy item spinning alone | Common | Yes — add items |
| Washer not level or not stable | Occasional | Yes — adjust feet |
| Worn suspension or damping parts | Less common | No — technician job |
What you can try yourself
- Open the lid and spread the wet laundry evenly around the basket, breaking up any clump.
- If you're washing one bulky item, add a couple of towels so it can balance.
- Check the machine is level and doesn't rock; adjust the feet (or reposition a portable unit on a firm, flat surface).
- Restart the spin — it should now ramp up to full speed.
- If E4 keeps interrupting even, level loads, the suspension or damping needs a technician.
When to call a technician
- E4 recurs on evenly loaded, level loads.
- The machine bangs or walks during spin.
- Clothes come out soaking because the spin never reached speed.
Typical professional repair cost: Usually $0 (a loading/levelling fix); worn suspension or damping parts run about $120—$260 with labor.
Frequently asked questions
How do I stop my Midea washer showing E4?
Spread the load evenly, never spin a single heavy item alone, and make sure the machine is level and stable. Those three steps clear almost all E4 cases.
Why does a portable Midea washer get E4 so easily?
Lightweight portable machines tip more readily, so an uneven load or a wobbly surface unbalances them faster than a heavy full-size washer. A firm, level base makes a big difference.
Does E4 mean something is broken?
Usually not — it's a loading message. It only suggests a fault if it keeps appearing on well-distributed loads with the machine sitting level, which can point to worn suspension.
Related Midea codes
- Midea Washer E1 Your Midea washer isn't getting enough water during fill — E1 points to the supply side (taps, inlet hose, mesh filter) far more often than to the machine itself.
- Midea Washer E2 Your Midea washer can't pump the water out — E2 flags a drain that didn't complete in time, usually a kinked or too-high drain hose or a clogged pump filter.
- Midea Washer E3 Your Midea washer doesn't think the lid is shut — E3 is the lid/lid-switch fault, so the machine won't spin until it's satisfied the lid is closed.
- Midea Dishwasher E1 Your Midea dishwasher didn't take in water within the allowed time — E1 is the fill (inlet) timeout, usually a closed tap, kinked hose, or clogged inlet screen.
More: all Midea washer codes · all Midea codes · search by symptom