Whirlpool Cooktop E_03 — What It Means & How to Fix It
Also shown as E03, E 03 on some models.
E_03 means an object, liquid or soil is putting pressure on the control panel — clear the control area and wipe it clean.
What this code means
Whirlpool says to remove any objects left on the control area and wipe any debris from the control panel surface; an object, liquids, or soils are putting pressure on the control panel and causing this error.
Whirlpool induction cooktops.
Most likely causes
| Cause | How likely | DIY-fixable? |
|---|---|---|
| Item on the controls | Very common | Yes — no tools |
| Spill on the controls | Very common | Yes — wipe |
What you can try yourself
- Remove objects from the control area.
- Wipe and dry the panel.
- Let the cooktop cool.
- Reset power for one minute if needed.
When to call a technician
- Repeat on a clean panel.
- Cracked glass.
- Dead keys.
Typical professional repair cost: Free.
Frequently asked questions
What does E_03 mean?
Something is pressing on the control panel.
Fix?
Clear and wipe the control area.
Same as F0?
Whirlpool uses the same explanation for F0/F00.
Sources checked
Error meanings can vary by model. This guide was checked against the documentation above; use the manual for the model number on your own appliance when it differs.
Related Whirlpool codes
- Whirlpool Cooktop F0 F0 or F00 means an object, liquid or soil is putting pressure on the touch control panel — remove anything on the control area, wipe it clean and dry, and reset power if needed.
- Whirlpool Cooktop F1E0 F1E0 indicates one or more keys are permanently pressed — turn the controls off, clear and thoroughly clean the touch panel, and reset power; if it persists the cooktop control may be at fault.
- Whirlpool Cooktop F2 E1 F2 E1 points to the keys: food, water or build-up may be hindering the controls, so clean the area with soap and water, dry it with a microfiber towel, and reset power.
- Whirlpool Cooktop F1E1 F1E1 means communication has been lost between the user interface (keypad) and the appliance manager board; reset power for a minute and call service if it returns.
More: all Whirlpool cooktop codes · all Whirlpool codes · search by symptom