Whirlpool Cooktop F0 — What It Means & How to Fix It
Also shown as F00 on some models.
F0 or F00 means an object, liquid or soil is putting pressure on the touch control panel — remove anything on the control area, wipe it clean and dry, and reset power if needed.
What this code means
Whirlpool says to remove any objects left on the control area and wipe any debris from the control panel surface, because an object, liquids, or soils are putting pressure on the control panel.
Whirlpool electric and induction cooktops with touch controls.
Most likely causes
| Cause | How likely | DIY-fixable? |
|---|---|---|
| Pan, utensil or towel resting on the controls | Very common | Yes — no tools |
| Spill or boil-over on the touch panel | Very common | Yes — wipe and dry |
| Touch panel fault | Less common | No — technician job |
What you can try yourself
- Turn the cooktop off and let it cool.
- Lift everything off the control area.
- Wipe the panel clean and dry it thoroughly.
- If the code stays, turn the breaker off for one minute and back on.
When to call a technician
- F0 with a clean, dry, empty panel after a reset.
- Glass cracked near the controls.
- Controls activate on their own.
Typical professional repair cost: Normally free; a touch control replacement runs about $200–$450.
Frequently asked questions
What does F0 mean on a Whirlpool cooktop?
An object, liquids or soils are putting pressure on the control panel.
How do I clear it?
Remove objects from the control area and wipe the panel clean.
Can a spill cause F0?
Yes — liquids on the touch panel are one of the causes Whirlpool lists.
Sources checked
Error meanings can vary by model. This guide was checked against the documentation above; use the manual for the model number on your own appliance when it differs.
Related Whirlpool codes
- Whirlpool Cooktop F1E0 F1E0 indicates one or more keys are permanently pressed — turn the controls off, clear and thoroughly clean the touch panel, and reset power; if it persists the cooktop control may be at fault.
- Whirlpool Cooktop F2 E1 F2 E1 points to the keys: food, water or build-up may be hindering the controls, so clean the area with soap and water, dry it with a microfiber towel, and reset power.
- Whirlpool Cooktop F1E1 F1E1 means communication has been lost between the user interface (keypad) and the appliance manager board; reset power for a minute and call service if it returns.
- Whirlpool Cooktop F1E7 F1E7 and F1E9 indicate a possible problem with the cooktop control or its wiring; reset at the breaker for one minute and call service if the code returns.
More: all Whirlpool cooktop codes · all Whirlpool codes · search by symptom