Whirlpool Cooktop F1E7 — What It Means & How to Fix It
Also shown as F1E9 on some models.
F1E7 and F1E9 indicate a possible problem with the cooktop control or its wiring; reset at the breaker for one minute and call service if the code returns.
What this code means
Whirlpool says there may be a problem with the cooktop control, or the associated wiring.
Whirlpool electric cooktops.
Most likely causes
| Cause | How likely | DIY-fixable? |
|---|---|---|
| Cooktop control fault | Common | No — technician job |
| Wiring fault | Occasional | No — technician job |
| Glitch | Occasional | Yes — breaker reset |
What you can try yourself
- Turn all elements off.
- Breaker off one minute, then on.
- Monitor for a minute.
- Service on a repeat.
When to call a technician
- Repeat code.
- Element will not turn off — switch off the breaker.
- Dead controls.
Typical professional repair cost: About $200–$450.
Frequently asked questions
What do F1E7 and F1E9 mean?
A possible problem with the cooktop control or its wiring.
Can I fix it?
Only the reset; the control is mains-connected.
Is it safe to cook?
Not if an element misbehaves; wait for service.
Sources checked
Error meanings can vary by model. This guide was checked against the documentation above; use the manual for the model number on your own appliance when it differs.
Related Whirlpool codes
- Whirlpool Cooktop F0 F0 or F00 means an object, liquid or soil is putting pressure on the touch control panel — remove anything on the control area, wipe it clean and dry, and reset power if needed.
- Whirlpool Cooktop F1E0 F1E0 indicates one or more keys are permanently pressed — turn the controls off, clear and thoroughly clean the touch panel, and reset power; if it persists the cooktop control may be at fault.
- Whirlpool Cooktop F2 E1 F2 E1 points to the keys: food, water or build-up may be hindering the controls, so clean the area with soap and water, dry it with a microfiber towel, and reset power.
- Whirlpool Cooktop F1E1 F1E1 means communication has been lost between the user interface (keypad) and the appliance manager board; reset power for a minute and call service if it returns.
More: all Whirlpool cooktop codes · all Whirlpool codes · search by symptom