Whirlpool Cooktop F03 — What It Means & How to Fix It
Also shown as F0E4, F13, F22 on some models.
F03, F0E4, F13 and F22 all mean an internal communication error on the touch control module; reset power for a minute and call service if the code remains.
What this code means
Whirlpool gives each of these codes the same explanation: there is an internal communication error on the touch control module.
Whirlpool electric cooktops. Four separate codes, one description.
Most likely causes
| Cause | How likely | DIY-fixable? |
|---|---|---|
| Touch control module fault | Common | No — technician job |
| Transient error | Common | Yes — breaker reset |
What you can try yourself
- Turn the breaker off for one minute.
- Turn it back on and watch for a minute.
- Verify each element responds.
- Schedule service if the code returns.
When to call a technician
- Repeat code.
- Controls unresponsive.
- Multiple codes cycling.
Typical professional repair cost: A touch control module typically costs $200–$450 installed.
Frequently asked questions
What does F03 mean on a Whirlpool cooktop?
An internal communication error on the touch control module.
Are F13 and F22 the same?
Whirlpool describes them identically.
Will a reset fix it?
Sometimes; a returning code means the module needs attention.
Sources checked
- Whirlpool Product Help: F03 - Electric Cooktop
- Whirlpool Product Help: F0E4 - Electric Cooktop
- Whirlpool Product Help: F13 - Electric Cooktop
- Whirlpool Product Help: F22 - Electric Cooktop
Error meanings can vary by model. This guide was checked against the documentation above; use the manual for the model number on your own appliance when it differs.
Related Whirlpool codes
- Whirlpool Cooktop F0 F0 or F00 means an object, liquid or soil is putting pressure on the touch control panel — remove anything on the control area, wipe it clean and dry, and reset power if needed.
- Whirlpool Cooktop F1E0 F1E0 indicates one or more keys are permanently pressed — turn the controls off, clear and thoroughly clean the touch panel, and reset power; if it persists the cooktop control may be at fault.
- Whirlpool Cooktop F2 E1 F2 E1 points to the keys: food, water or build-up may be hindering the controls, so clean the area with soap and water, dry it with a microfiber towel, and reset power.
- Whirlpool Cooktop F1E1 F1E1 means communication has been lost between the user interface (keypad) and the appliance manager board; reset power for a minute and call service if it returns.
More: all Whirlpool cooktop codes · all Whirlpool codes · search by symptom