Whirlpool Cooktop F0E1 — What It Means & How to Fix It
Also shown as F0 E1 on some models.
F0E1 is a cookware code on induction cooktops — use ferromagnetic pans of the right size, centred on the zone, and press On/Off twice to clear the code.
What this code means
Whirlpool's F0E1 article asks whether the correct cookware is being used: only ferromagnetic pots and pans (enameled steel, cast iron, induction-ready stainless) work, and the pot must be a suitable minimum diameter and centred. Pressing On/Off twice removes the code.
Whirlpool induction cooktops.
Most likely causes
| Cause | How likely | DIY-fixable? |
|---|---|---|
| Non-magnetic pan (glass, ceramic, copper, aluminum) | Very common | Yes — change pan |
| Pan too small for the zone | Common | Yes — change zone or pan |
| Pan off-centre | Common | Yes — reposition |
What you can try yourself
- Check the pan with a magnet.
- Choose the zone that matches the pan base and centre the pan.
- Press On/Off twice to remove F0E1.
- Start cooking again.
When to call a technician
- F0E1 with proven induction cookware on every zone.
- Zones never detect pans.
- Other F0 codes too.
Typical professional repair cost: Free.
Frequently asked questions
What does F0E1 mean?
A cookware problem on an induction cooktop.
How do I clear it?
Press the On/Off button twice.
Which pans work?
Enameled steel, cast iron and stainless steel designed for induction.
Sources checked
Error meanings can vary by model. This guide was checked against the documentation above; use the manual for the model number on your own appliance when it differs.
Related Whirlpool codes
- Whirlpool Cooktop F0 F0 or F00 means an object, liquid or soil is putting pressure on the touch control panel — remove anything on the control area, wipe it clean and dry, and reset power if needed.
- Whirlpool Cooktop F1E0 F1E0 indicates one or more keys are permanently pressed — turn the controls off, clear and thoroughly clean the touch panel, and reset power; if it persists the cooktop control may be at fault.
- Whirlpool Cooktop F2 E1 F2 E1 points to the keys: food, water or build-up may be hindering the controls, so clean the area with soap and water, dry it with a microfiber towel, and reset power.
- Whirlpool Cooktop F1E1 F1E1 means communication has been lost between the user interface (keypad) and the appliance manager board; reset power for a minute and call service if it returns.
More: all Whirlpool cooktop codes · all Whirlpool codes · search by symptom