Whirlpool Cooktop F2 — What It Means & How to Fix It
F2 means the surface cooking area is too hot — remove the pans and let it cool, and F2 disappears by itself.
What this code means
Whirlpool says to remove the pans from the surface cooking area; F2 will disappear when the area has cooled. If you turn it back on and F2 reappears, the cooktop is still too hot and needs longer.
Plain F2 on Whirlpool electric cooktops; F2 E1 is a keypad code.
Most likely causes
| Cause | How likely | DIY-fixable? |
|---|---|---|
| Area overheated in use | Very common | Yes — let it cool |
| Empty or boiled-dry pan | Common | Yes — remove pan |
| Sensor fault if it shows when cold | Less common | No — technician job |
What you can try yourself
- Turn off the surface cooking area.
- Remove the pans.
- Wait for F2 to disappear.
- If it reappears on restart, turn off again and allow more time.
When to call a technician
- F2 on a completely cold cooktop.
- F2 every time on low heat.
- Cracked glass.
Typical professional repair cost: Free.
Frequently asked questions
What does F2 mean on a Whirlpool cooktop?
The surface cooking area is too hot.
How do I clear it?
Remove the pans and let the area cool; it clears itself.
It came back when I restarted?
The cooktop is still too hot — turn it off and wait longer.
Sources checked
Error meanings can vary by model. This guide was checked against the documentation above; use the manual for the model number on your own appliance when it differs.
Related Whirlpool codes
- Whirlpool Cooktop F0 F0 or F00 means an object, liquid or soil is putting pressure on the touch control panel — remove anything on the control area, wipe it clean and dry, and reset power if needed.
- Whirlpool Cooktop F1E0 F1E0 indicates one or more keys are permanently pressed — turn the controls off, clear and thoroughly clean the touch panel, and reset power; if it persists the cooktop control may be at fault.
- Whirlpool Cooktop F2 E1 F2 E1 points to the keys: food, water or build-up may be hindering the controls, so clean the area with soap and water, dry it with a microfiber towel, and reset power.
- Whirlpool Cooktop F1E1 F1E1 means communication has been lost between the user interface (keypad) and the appliance manager board; reset power for a minute and call service if it returns.
More: all Whirlpool cooktop codes · all Whirlpool codes · search by symptom