Whirlpool Cooktop F25 — What It Means & How to Fix It
F25 means there is a problem with the power supply to the cooktop — reset the breaker, and contact a qualified electrician if it happens again.
What this code means
Whirlpool says there is a problem with power supply to the cooktop, and that if the issue reoccurs you should contact a qualified electrician.
Whirlpool electric and induction cooktops.
Most likely causes
| Cause | How likely | DIY-fixable? |
|---|---|---|
| Supply voltage problem | Common | No — electrician |
| Breaker partly tripped | Common | Yes — reset breaker |
| Loose supply connection | Occasional | No — electrician |
What you can try yourself
- Turn the cooktop breaker fully off, wait a minute, and turn it on.
- Monitor the display.
- Verify the cooktop heats.
- Call an electrician if F25 returns.
When to call a technician
- Repeat code.
- Breaker trips.
- Lights dim when the cooktop runs.
Typical professional repair cost: Electrician visit $100–$250.
Frequently asked questions
What does F25 mean?
A problem with the power supply to the cooktop.
Who should I call?
A qualified electrician if it reoccurs.
Is the cooktop faulty?
The code points to the supply, not the cooktop.
Sources checked
Error meanings can vary by model. This guide was checked against the documentation above; use the manual for the model number on your own appliance when it differs.
Related Whirlpool codes
- Whirlpool Cooktop F0 F0 or F00 means an object, liquid or soil is putting pressure on the touch control panel — remove anything on the control area, wipe it clean and dry, and reset power if needed.
- Whirlpool Cooktop F1E0 F1E0 indicates one or more keys are permanently pressed — turn the controls off, clear and thoroughly clean the touch panel, and reset power; if it persists the cooktop control may be at fault.
- Whirlpool Cooktop F2 E1 F2 E1 points to the keys: food, water or build-up may be hindering the controls, so clean the area with soap and water, dry it with a microfiber towel, and reset power.
- Whirlpool Cooktop F1E1 F1E1 means communication has been lost between the user interface (keypad) and the appliance manager board; reset power for a minute and call service if it returns.
More: all Whirlpool cooktop codes · all Whirlpool codes · search by symptom