Whirlpool Cooktop F36 — What It Means & How to Fix It
Also shown as F37 on some models.
F36 and F37 point to a temperature sensor on an induction coil; on radiant-element cooktops, F36 instead indicates a communication problem between the touch control module and the electronic control.
What this code means
Whirlpool says F36 and F37 may be a problem with a temperature sensor on an induction coil. A separate article for radiant element cooktops says F36 may be a problem with communication between the touch control module and the electronic control.
Meaning depends on whether the cooktop is induction or radiant.
Most likely causes
| Cause | How likely | DIY-fixable? |
|---|---|---|
| Induction coil temperature sensor fault | Common | No — technician job |
| Control communication fault (radiant) | Common | No — technician job |
| Glitch | Occasional | Yes — breaker reset |
What you can try yourself
- Let the cooktop cool.
- Breaker off one minute, then on.
- Monitor.
- Schedule service with the model number.
When to call a technician
- Repeat code.
- One zone will not heat.
- Zone overheats.
Typical professional repair cost: About $200–$500.
Frequently asked questions
What does F36 mean?
A possible induction coil temperature sensor problem, or on radiant cooktops a communication problem between the touch control module and electronic control.
And F37?
The induction coil temperature sensor explanation.
DIY?
Reset only.
Sources checked
- Whirlpool Product Help: F36, F37 - Electric Cooktop
- Whirlpool Product Help: F36 Error Code - Radiant Element Cooktop - Electric Cooktop
Error meanings can vary by model. This guide was checked against the documentation above; use the manual for the model number on your own appliance when it differs.
Related Whirlpool codes
- Whirlpool Cooktop F0 F0 or F00 means an object, liquid or soil is putting pressure on the touch control panel — remove anything on the control area, wipe it clean and dry, and reset power if needed.
- Whirlpool Cooktop F1E0 F1E0 indicates one or more keys are permanently pressed — turn the controls off, clear and thoroughly clean the touch panel, and reset power; if it persists the cooktop control may be at fault.
- Whirlpool Cooktop F2 E1 F2 E1 points to the keys: food, water or build-up may be hindering the controls, so clean the area with soap and water, dry it with a microfiber towel, and reset power.
- Whirlpool Cooktop F1E1 F1E1 means communication has been lost between the user interface (keypad) and the appliance manager board; reset power for a minute and call service if it returns.
More: all Whirlpool cooktop codes · all Whirlpool codes · search by symptom