Whirlpool Cooktop F61 — What It Means & How to Fix It
Also shown as F63, F64 on some models.
F61, F63 and F64 indicate a possible problem with the touch control, the power control module, the wiring, or the electrical supply; reset power and have the supply checked if it repeats.
What this code means
Whirlpool says there may be a problem with the user interface (touch control), the power control module, the associated wiring, or the electrical supply.
Whirlpool electric and induction cooktops.
Most likely causes
| Cause | How likely | DIY-fixable? |
|---|---|---|
| Electrical supply problem | Common | No — electrician |
| Power control module fault | Common | No — technician job |
| Touch control fault | Occasional | No — technician job |
What you can try yourself
- Reset the cooktop breaker for one minute.
- Monitor.
- If it returns, have an electrician confirm the supply.
- Then schedule appliance service.
When to call a technician
- Repeat code.
- Breaker trips.
- Partial power.
Typical professional repair cost: Electrician $100–$250; module repairs $300–$600.
Frequently asked questions
What do F61, F63 and F64 mean?
Possible touch control, power control module, wiring or electrical supply problem.
Supply or cooktop?
Whirlpool lists both; an electrician can rule out the supply.
Reset?
Breaker off one minute.
Sources checked
- Whirlpool Product Help: F61 - Electric Cooktop
- Whirlpool Product Help: F63 - Electric Cooktop
- Whirlpool Product Help: F64 - Electric Cooktop
Error meanings can vary by model. This guide was checked against the documentation above; use the manual for the model number on your own appliance when it differs.
Related Whirlpool codes
- Whirlpool Cooktop F0 F0 or F00 means an object, liquid or soil is putting pressure on the touch control panel — remove anything on the control area, wipe it clean and dry, and reset power if needed.
- Whirlpool Cooktop F1E0 F1E0 indicates one or more keys are permanently pressed — turn the controls off, clear and thoroughly clean the touch panel, and reset power; if it persists the cooktop control may be at fault.
- Whirlpool Cooktop F2 E1 F2 E1 points to the keys: food, water or build-up may be hindering the controls, so clean the area with soap and water, dry it with a microfiber towel, and reset power.
- Whirlpool Cooktop F1E1 F1E1 means communication has been lost between the user interface (keypad) and the appliance manager board; reset power for a minute and call service if it returns.
More: all Whirlpool cooktop codes · all Whirlpool codes · search by symptom