Whirlpool Cooktop F6E0 — What It Means & How to Fix It
Also shown as F6E4 on some models.
F6E0 and F6E4 mean communication was lost between the keypad and the user interface control; reset power for a minute and call service if it persists.
What this code means
Whirlpool says there has been a loss of communication between the user interface, or keypad, and the user interface control.
Whirlpool electric and induction cooktops.
Most likely causes
| Cause | How likely | DIY-fixable? |
|---|---|---|
| Temporary communication loss | Common | Yes — breaker reset |
| Ribbon or harness fault | Occasional | No — technician job |
| User interface control fault | Occasional | No — technician job |
What you can try yourself
- Breaker off one minute.
- Restore power.
- Monitor and test.
- Service on a repeat.
When to call a technician
- Repeat code.
- Frozen display.
- Keys dead.
Typical professional repair cost: About $200–$450.
Frequently asked questions
What does F6E0 mean?
Loss of communication between the keypad and the user interface control.
Is F6E4 the same?
Yes, per Whirlpool.
What causes it?
Whirlpool does not say beyond the communication loss.
Sources checked
Error meanings can vary by model. This guide was checked against the documentation above; use the manual for the model number on your own appliance when it differs.
Related Whirlpool codes
- Whirlpool Cooktop F0 F0 or F00 means an object, liquid or soil is putting pressure on the touch control panel — remove anything on the control area, wipe it clean and dry, and reset power if needed.
- Whirlpool Cooktop F1E0 F1E0 indicates one or more keys are permanently pressed — turn the controls off, clear and thoroughly clean the touch panel, and reset power; if it persists the cooktop control may be at fault.
- Whirlpool Cooktop F2 E1 F2 E1 points to the keys: food, water or build-up may be hindering the controls, so clean the area with soap and water, dry it with a microfiber towel, and reset power.
- Whirlpool Cooktop F1E1 F1E1 means communication has been lost between the user interface (keypad) and the appliance manager board; reset power for a minute and call service if it returns.
More: all Whirlpool cooktop codes · all Whirlpool codes · search by symptom