Whirlpool Cooktop FC E0 — What It Means & How to Fix It
Also shown as FCE0 on some models.
FC E0 indicates a possible problem with the electrical supply, the wiring, or the induction module; reset the breaker, then call an electrician or service if it repeats.
What this code means
Whirlpool says there may be a problem with the electrical supply, the associated wiring, or the induction module.
Whirlpool cooktops; unlike FC codes on ranges, these are not Wi-Fi codes.
Most likely causes
| Cause | How likely | DIY-fixable? |
|---|---|---|
| Supply problem | Common | No — electrician |
| Induction module fault | Common | No — technician job |
| Wiring fault | Occasional | No — technician job |
What you can try yourself
- Breaker off one minute.
- Restore and monitor.
- Test a zone.
- Call for help on a repeat.
When to call a technician
- Repeat code.
- No zones work.
- Breaker trips.
Typical professional repair cost: About $300–$700 for an induction module.
Frequently asked questions
What does FC E0 mean on a cooktop?
Possible electrical supply, wiring or induction module problem.
Is it a Wi-Fi code?
Not on cooktops.
Reset?
Breaker off one minute.
Sources checked
Error meanings can vary by model. This guide was checked against the documentation above; use the manual for the model number on your own appliance when it differs.
Related Whirlpool codes
- Whirlpool Cooktop F0 F0 or F00 means an object, liquid or soil is putting pressure on the touch control panel — remove anything on the control area, wipe it clean and dry, and reset power if needed.
- Whirlpool Cooktop F1E0 F1E0 indicates one or more keys are permanently pressed — turn the controls off, clear and thoroughly clean the touch panel, and reset power; if it persists the cooktop control may be at fault.
- Whirlpool Cooktop F2 E1 F2 E1 points to the keys: food, water or build-up may be hindering the controls, so clean the area with soap and water, dry it with a microfiber towel, and reset power.
- Whirlpool Cooktop F1E1 F1E1 means communication has been lost between the user interface (keypad) and the appliance manager board; reset power for a minute and call service if it returns.
More: all Whirlpool cooktop codes · all Whirlpool codes · search by symptom