Whirlpool Microwave AccuPop Fail — What It Means & How to Fix It
Also shown as AccuPop on some models.
AccuPop Fail means the oven could not execute the popcorn-sensing function, possibly because of a problem with the AccuPop sensor; reset power for a minute and retry.
What this code means
Whirlpool says the oven could not execute the function and there may be a problem with the AccuPop sensor. AccuPop listens for popping to time popcorn automatically.
Whirlpool over-the-range microwaves with the AccuPop cycle.
Most likely causes
| Cause | How likely | DIY-fixable? |
|---|---|---|
| AccuPop sensor fault | Common | No — technician job |
| One-off failure of the cycle | Common | Yes — breaker reset |
What you can try yourself
- Breaker off for one minute, then on.
- Monitor for one minute.
- Try AccuPop again with a standard bag.
- Schedule service if it fails again.
When to call a technician
- Message every time.
- Other codes with it.
- Popcorn burns on AccuPop.
Typical professional repair cost: About $120–$250.
Frequently asked questions
What does AccuPop Fail mean?
The oven could not execute the function; there may be a problem with the AccuPop sensor.
Can I use the microwave otherwise?
If it operates normally after the reset, yes.
How do I reset?
Turn the breaker off for one minute.
Sources checked
Error meanings can vary by model. This guide was checked against the documentation above; use the manual for the model number on your own appliance when it differs.
Related Whirlpool codes
- Whirlpool Microwave E03 E03 — or a plain F2 — means the keypad reported a problem to the control board; reset power for one minute and call for service if it comes back.
- Whirlpool Microwave SE SE means there is a problem with the keypad (user interface) or its wiring — clean and dry the panel, reset power for a minute, and call service if SE remains.
- Whirlpool Microwave E11 E11 and E12 point to the microwave's gas sensor — the sensor used for automatic cooking — or its wiring; reset power for a minute, and expect to need a technician if it returns.
- Whirlpool Microwave E13 E13 means the oven did not pre-heat correctly, with a possible problem in the appliance control board or its wiring; reset power for a minute and call service if it repeats.
More: all Whirlpool microwave codes · all Whirlpool codes · search by symptom