Whirlpool Microwave E24 — What It Means & How to Fix It
E24 means the oven reached an overheat condition of 500°F (260°C) — let it cool, reset power for a minute, and stop using it and call service if the code returns.
What this code means
Whirlpool says E24 means the oven reached an overheat condition of 500°F (260°C), and that there may be a problem with the thermal sensor, the gas sensor, the appliance control board, or the associated wiring.
Whirlpool over-the-range microwaves.
Most likely causes
| Cause | How likely | DIY-fixable? |
|---|---|---|
| Genuine overheating during a long or empty cycle | Common | Yes — let it cool |
| Thermal or gas sensor fault | Common | No — technician job |
| Control board fault | Occasional | No — technician job |
What you can try yourself
- Stop cooking and leave the door open to cool.
- Make sure the vents are not blocked and nothing was run empty.
- Turn the breaker off for one minute, then on.
- If E24 returns, leave the breaker off and schedule service.
When to call a technician
- E24 on a cold microwave.
- Smoke, scorching or a burning smell.
- Repeat code after cooling.
Typical professional repair cost: Sensor or control repairs typically cost $120–$400.
Frequently asked questions
What does E24 mean?
The oven reached an overheat condition of 500°F (260°C).
Is E24 dangerous?
Treat it seriously: stop cooking, let it cool, and do not keep using a microwave that repeats the code.
What parts are suspected?
The thermal sensor, the gas sensor, the appliance control board, or the associated wiring.
Sources checked
Error meanings can vary by model. This guide was checked against the documentation above; use the manual for the model number on your own appliance when it differs.
Related Whirlpool codes
- Whirlpool Microwave E03 E03 — or a plain F2 — means the keypad reported a problem to the control board; reset power for one minute and call for service if it comes back.
- Whirlpool Microwave SE SE means there is a problem with the keypad (user interface) or its wiring — clean and dry the panel, reset power for a minute, and call service if SE remains.
- Whirlpool Microwave E11 E11 and E12 point to the microwave's gas sensor — the sensor used for automatic cooking — or its wiring; reset power for a minute, and expect to need a technician if it returns.
- Whirlpool Microwave E13 E13 means the oven did not pre-heat correctly, with a possible problem in the appliance control board or its wiring; reset power for a minute and call service if it repeats.
More: all Whirlpool microwave codes · all Whirlpool codes · search by symptom