Whirlpool Microwave F8E5 — What It Means & How to Fix It
Also shown as F8 E5 on some models.
F8E5 means the oven could not execute the function, with a possible problem in the exhaust air temperature sensor or its wiring; reset power and call service if it repeats.
What this code means
Whirlpool says that with F8E5 the oven could not execute the function and there may be a problem with the exhaust air temperature sensor, or the associated wiring.
Whirlpool over-the-range microwaves.
Most likely causes
| Cause | How likely | DIY-fixable? |
|---|---|---|
| Exhaust air temperature sensor fault | Common | No — technician job |
| Wiring fault | Occasional | No — technician job |
| Glitch | Occasional | Yes — breaker reset |
What you can try yourself
- Reset power for one minute.
- Monitor.
- Verify operation.
- Service on a repeat.
When to call a technician
- Repeat code.
- Vent fan misbehaves.
- Overheating.
Typical professional repair cost: About $120–$250.
Frequently asked questions
What does F8E5 mean?
Possible exhaust air temperature sensor or wiring problem; the oven could not execute the function.
What should I do?
Reset power for one minute, then call service if it returns.
Is it the vent fan?
Whirlpool names the exhaust air temperature sensor, not the fan.
Sources checked
Error meanings can vary by model. This guide was checked against the documentation above; use the manual for the model number on your own appliance when it differs.
Related Whirlpool codes
- Whirlpool Microwave E03 E03 — or a plain F2 — means the keypad reported a problem to the control board; reset power for one minute and call for service if it comes back.
- Whirlpool Microwave SE SE means there is a problem with the keypad (user interface) or its wiring — clean and dry the panel, reset power for a minute, and call service if SE remains.
- Whirlpool Microwave E11 E11 and E12 point to the microwave's gas sensor — the sensor used for automatic cooking — or its wiring; reset power for a minute, and expect to need a technician if it returns.
- Whirlpool Microwave E13 E13 means the oven did not pre-heat correctly, with a possible problem in the appliance control board or its wiring; reset power for a minute and call service if it repeats.
More: all Whirlpool microwave codes · all Whirlpool codes · search by symptom