Whirlpool Microwave FC E7 — What It Means & How to Fix It
Also shown as FCE7 on some models.
FC E7 means the microwave did not connect to your router and its Wi-Fi module has no link to the internet — reset the microwave, then reset your wireless router.
What this code means
Whirlpool says the appliance did not connect to your router and there is no link between the Wi-Fi module and the internet. The fix is a power reset of the appliance and of the router.
Connected Whirlpool over-the-range microwaves.
Most likely causes
| Cause | How likely | DIY-fixable? |
|---|---|---|
| Internet or router down | Very common | Yes — restart router |
| Microwave lost its session | Common | Yes — breaker reset |
| Wi-Fi module fault | Less common | No — technician job |
What you can try yourself
- Check other devices are online.
- Breaker off for one minute, then on; start a cycle.
- Reset your wireless router.
- Call 1-866-333-4591 if it continues.
When to call a technician
- Persists with working internet.
- Returns daily.
- Setup cannot complete.
Typical professional repair cost: Usually free.
Frequently asked questions
What does FC E7 mean?
The appliance did not connect to your router; no link between the Wi-Fi module and the internet.
What do I reset?
Both the microwave and the wireless router.
Is it my provider?
Possibly, if nothing else is online.
Sources checked
- Whirlpool Product Help: FC E7 - Over-the-Range Microwave
- Whirlpool Product Help: FCE7 - Over-the-Range Microwave
Error meanings can vary by model. This guide was checked against the documentation above; use the manual for the model number on your own appliance when it differs.
Related Whirlpool codes
- Whirlpool Microwave E03 E03 — or a plain F2 — means the keypad reported a problem to the control board; reset power for one minute and call for service if it comes back.
- Whirlpool Microwave SE SE means there is a problem with the keypad (user interface) or its wiring — clean and dry the panel, reset power for a minute, and call service if SE remains.
- Whirlpool Microwave E11 E11 and E12 point to the microwave's gas sensor — the sensor used for automatic cooking — or its wiring; reset power for a minute, and expect to need a technician if it returns.
- Whirlpool Microwave E13 E13 means the oven did not pre-heat correctly, with a possible problem in the appliance control board or its wiring; reset power for a minute and call service if it repeats.
More: all Whirlpool microwave codes · all Whirlpool codes · search by symptom