Whirlpool Microwave FC E8 — What It Means & How to Fix It
Also shown as FCE8, Registration Error on some models.
FC E8, shown as Registration Error, means app registration failed — usually a mistyped SAID number or the wrong appliance type or model selected.
What this code means
Whirlpool says the Registration Error appears if the SAID number was entered incorrectly or the wrong appliance type or model number was selected. Its fuller checklist adds that your phone must be online, a firewall may block the appliance, the appliance must already be on the home network, and a previously owned appliance needs its ownership transferred.
Connected Whirlpool over-the-range microwaves, during app setup.
Most likely causes
| Cause | How likely | DIY-fixable? |
|---|---|---|
| SAID mistyped | Very common | Yes — no tools |
| Wrong appliance type or model chosen | Common | Yes — no tools |
| Appliance not yet on the home network, or blocked by a firewall | Common | Yes — network settings |
| Previously owned appliance still registered | Occasional | Yes — transfer ownership |
What you can try yourself
- Confirm your phone has internet access.
- Check the microwave is connected to the home network.
- Restart registration, choosing the correct appliance type and model.
- Re-enter the SAID carefully.
- For a second-hand unit, follow Whirlpool's transfer-of-ownership steps or call 1-866-333-4591.
When to call a technician
- Fails with verified details.
- SAID label unreadable.
- Registered to another account.
Typical professional repair cost: No cost.
Frequently asked questions
What is the SAID?
The Smart Appliance ID used to register a connected Whirlpool appliance.
Why does registration fail?
Most often an incorrect SAID or the wrong appliance type or model number.
I bought it used — what now?
Whirlpool says ownership must be transferred before you can register it.
Sources checked
- Whirlpool Product Help: FC E8 - Over-the-Range Microwave
- Whirlpool Product Help: FCE8 - Over-the-Range Microwave
- Whirlpool Product Help: Registration Error - Over-the-Range Microwave
Error meanings can vary by model. This guide was checked against the documentation above; use the manual for the model number on your own appliance when it differs.
Related Whirlpool codes
- Whirlpool Microwave E03 E03 — or a plain F2 — means the keypad reported a problem to the control board; reset power for one minute and call for service if it comes back.
- Whirlpool Microwave SE SE means there is a problem with the keypad (user interface) or its wiring — clean and dry the panel, reset power for a minute, and call service if SE remains.
- Whirlpool Microwave E11 E11 and E12 point to the microwave's gas sensor — the sensor used for automatic cooking — or its wiring; reset power for a minute, and expect to need a technician if it returns.
- Whirlpool Microwave E13 E13 means the oven did not pre-heat correctly, with a possible problem in the appliance control board or its wiring; reset power for a minute and call service if it repeats.
More: all Whirlpool microwave codes · all Whirlpool codes · search by symptom