Whirlpool Range 3d51 — What It Means & How to Fix It
3d51 indicates a possible oven control or wiring problem; reset at the breaker for one minute and schedule service if it returns.
What this code means
Whirlpool says 3d51 may mean a problem with the oven control, or the associated wiring. It is the odd one out among the 3d codes, which otherwise concern the sensor and meat probe.
Four-character Whirlpool range code.
Most likely causes
| Cause | How likely | DIY-fixable? |
|---|---|---|
| Oven control fault | Common | No — technician job |
| Wiring fault | Occasional | No — technician job |
| Transient error | Occasional | Yes — breaker reset |
What you can try yourself
- Cancel the oven.
- Breaker(s) off for one minute, then on.
- Monitor for a minute.
- Schedule service if 3d51 returns.
When to call a technician
- Repeat code.
- No response from controls.
- Oven misbehaves.
Typical professional repair cost: About $250–$500 for a control replacement.
Frequently asked questions
What does 3d51 mean?
A possible problem with the oven control, or the associated wiring.
Is it a meat probe code like 3d31?
No. Whirlpool attributes 3d51 to the oven control.
What should I do first?
Reset power for one minute.
Sources checked
Error meanings can vary by model. This guide was checked against the documentation above; use the manual for the model number on your own appliance when it differs.
Related Whirlpool codes
- Whirlpool Range F3 E0 F3 E0 on a Whirlpool-family range flags the oven temperature sensing circuit — Whirlpool's own description names the temperature sensor, the control, or the associated wiring. A one-minute breaker reset is the official first step.
- Whirlpool Range F3 E1 F3 E1 is the paired partner of F3 E0 on Whirlpool-family ranges: the same oven temperature sensing circuit, control, or wiring suspects, per Whirlpool's own page. A one-minute breaker reset is the official first step.
- Whirlpool Range F1 E0 F1 E0 on a Whirlpool-family range points at the oven control — Whirlpool's own page names the oven control or the associated wiring. A one-minute breaker reset is the official first step.
- Whirlpool Range F2 E0 F2 E0 on a Whirlpool-family range points at the user interface, the keypad, the control, or the wiring — the input side of the oven. Clean keys and a one-minute breaker reset first.
More: all Whirlpool range codes · all Whirlpool codes · search by symptom