Whirlpool Range 4d11 — What It Means & How to Fix It
Also shown as 4d12, 4d51, 4d52 on some models.
4d11, 4d12, 4d51 and 4d52 point to the oven door latch assembly, the door switch, or their wiring; close the door, reset power for a minute, and call service if it persists.
What this code means
Whirlpool says these four codes may mean a problem with the oven door latch assembly, the door switch, or the associated wiring.
Other 4d codes concern the cooling fan (4d21, 4d22, 4d41, 4d42) or the oven control (4d31, 4d32).
Most likely causes
| Cause | How likely | DIY-fixable? |
|---|---|---|
| Latch assembly fault | Common | No — technician job |
| Door switch fault | Common | No — technician job |
| Door not closed | Occasional | Yes — no tools |
What you can try yourself
- Close the door fully.
- Turn off the breaker(s) for one minute, then on.
- Monitor and try the door gently.
- Call for service if the code returns.
When to call a technician
- Door locked cold.
- Repeat code.
- Latch damage.
Typical professional repair cost: Roughly $150–$300.
Frequently asked questions
What does 4d11 mean?
A possible problem with the oven door latch assembly, the door switch, or the associated wiring.
Are all 4d codes about the door?
No — some concern the cooling fan or the oven control.
How do I reset?
Breaker off for one minute.
Sources checked
- Whirlpool Product Help: 4d11 - Error Code - Range
- Whirlpool Product Help: 4d12 - Error Code - Range
- Whirlpool Product Help: 4d51 - Error Code - Range
- Whirlpool Product Help: 4d52 - Error Code - Range
Error meanings can vary by model. This guide was checked against the documentation above; use the manual for the model number on your own appliance when it differs.
Related Whirlpool codes
- Whirlpool Range F3 E0 F3 E0 on a Whirlpool-family range flags the oven temperature sensing circuit — Whirlpool's own description names the temperature sensor, the control, or the associated wiring. A one-minute breaker reset is the official first step.
- Whirlpool Range F3 E1 F3 E1 is the paired partner of F3 E0 on Whirlpool-family ranges: the same oven temperature sensing circuit, control, or wiring suspects, per Whirlpool's own page. A one-minute breaker reset is the official first step.
- Whirlpool Range F1 E0 F1 E0 on a Whirlpool-family range points at the oven control — Whirlpool's own page names the oven control or the associated wiring. A one-minute breaker reset is the official first step.
- Whirlpool Range F2 E0 F2 E0 on a Whirlpool-family range points at the user interface, the keypad, the control, or the wiring — the input side of the oven. Clean keys and a one-minute breaker reset first.
More: all Whirlpool range codes · all Whirlpool codes · search by symptom