Whirlpool Range 4d41 — What It Means & How to Fix It
Also shown as 4d42 on some models.
4d41 and 4d42 mean the cooling fan speed is too high; reset at the breaker for a minute, and have a technician check the fan if the code returns.
What this code means
Whirlpool describes 4d41 and 4d42 as cooling fan speed too high, and lists an airflow restriction, the oven cooling fan, or the associated wiring as possible problems.
The F#E# equivalent is F8 E2.
Most likely causes
| Cause | How likely | DIY-fixable? |
|---|---|---|
| Cooling fan or speed sensing fault | Common | No — technician job |
| Airflow restriction | Occasional | Yes — no tools |
| Wiring fault | Occasional | No — technician job |
What you can try yourself
- Check vents are clear.
- Turn off the breaker(s) for one minute and restore power.
- Monitor for one minute.
- Schedule service if it repeats.
When to call a technician
- Repeat code.
- Fan very loud.
- Fan never stops.
Typical professional repair cost: Around $150–$300.
Frequently asked questions
What does 4d41 mean on a Whirlpool range?
Whirlpool describes it as cooling fan speed too high. The control has measured the oven cooling fan turning faster than it expects.
Could blocked vents cause 4d41?
Whirlpool lists an airflow restriction among the possible problems, alongside the cooling fan and its wiring, so clearing the vents is worth doing first.
Is 4d42 a different fault?
It is a separate code number with the same Whirlpool explanation and the same one-minute breaker reset.
Sources checked
Error meanings can vary by model. This guide was checked against the documentation above; use the manual for the model number on your own appliance when it differs.
Related Whirlpool codes
- Whirlpool Range F3 E0 F3 E0 on a Whirlpool-family range flags the oven temperature sensing circuit — Whirlpool's own description names the temperature sensor, the control, or the associated wiring. A one-minute breaker reset is the official first step.
- Whirlpool Range F3 E1 F3 E1 is the paired partner of F3 E0 on Whirlpool-family ranges: the same oven temperature sensing circuit, control, or wiring suspects, per Whirlpool's own page. A one-minute breaker reset is the official first step.
- Whirlpool Range F1 E0 F1 E0 on a Whirlpool-family range points at the oven control — Whirlpool's own page names the oven control or the associated wiring. A one-minute breaker reset is the official first step.
- Whirlpool Range F2 E0 F2 E0 on a Whirlpool-family range points at the user interface, the keypad, the control, or the wiring — the input side of the oven. Clean keys and a one-minute breaker reset first.
More: all Whirlpool range codes · all Whirlpool codes · search by symptom