Whirlpool Range Call Service — What It Means & How to Fix It
Also shown as Press Cancel to Reset on some models.
Call Service or Press Cancel to Reset means the range has detected a fault — press Cancel, and if Call Service comes back, reset power at the breaker and try a bake cycle.
What this code means
Whirlpool says this message is displayed when a fault or error has been detected. The first response is to press the Cancel button or pad. If Call Service is displayed again after pressing Cancel, reset power to the range and start a bake cycle to see whether it recurs.
A general message on Whirlpool ranges; it may be accompanied by a specific F code, which tells you more.
Most likely causes
| Cause | How likely | DIY-fixable? |
|---|---|---|
| Temporary fault cleared by Cancel | Common | Yes — no tools |
| Fault needing a power reset | Common | Yes — breaker reset |
| Underlying component fault | Occasional | No — technician job |
What you can try yourself
- Note any F code shown with the message.
- Press Cancel.
- If Call Service reappears, turn the breaker(s) off for one minute and back on.
- Start a bake cycle and watch the display.
- Schedule service if the message returns.
When to call a technician
- Call Service returns after a power reset.
- The oven will not heat.
- Any smell of gas or burning.
Typical professional repair cost: Diagnosis typically costs $100–$160; the repair depends on the fault found.
Frequently asked questions
What does Call Service mean on a Whirlpool range?
A fault or error has been detected.
Do I really need to call service?
Not straight away. Whirlpool says to press Cancel first, then reset power if the message returns.
What should I tell the technician?
Any F code that appeared, what the oven was doing, and that Cancel and a power reset did not clear it.
Sources checked
Error meanings can vary by model. This guide was checked against the documentation above; use the manual for the model number on your own appliance when it differs.
Related Whirlpool codes
- Whirlpool Range F3 E0 F3 E0 on a Whirlpool-family range flags the oven temperature sensing circuit — Whirlpool's own description names the temperature sensor, the control, or the associated wiring. A one-minute breaker reset is the official first step.
- Whirlpool Range F3 E1 F3 E1 is the paired partner of F3 E0 on Whirlpool-family ranges: the same oven temperature sensing circuit, control, or wiring suspects, per Whirlpool's own page. A one-minute breaker reset is the official first step.
- Whirlpool Range F1 E0 F1 E0 on a Whirlpool-family range points at the oven control — Whirlpool's own page names the oven control or the associated wiring. A one-minute breaker reset is the official first step.
- Whirlpool Range F2 E0 F2 E0 on a Whirlpool-family range points at the user interface, the keypad, the control, or the wiring — the input side of the oven. Clean keys and a one-minute breaker reset first.
More: all Whirlpool range codes · all Whirlpool codes · search by symptom