Whirlpool Range ES — What It Means & How to Fix It
Also shown as E5, ES On on some models.
ES — which can look like E5 — means Energy Save mode is active and the display sleeps when the range is idle; press and hold CLOCK for 10 seconds to switch it off.
What this code means
Whirlpool explains that Energy Save puts the control and clock into a sleep mode that turns the display off when the range is not being used. With it active, after 5 idle minutes the display shows ES followed by On twice and then goes blank until a key is pressed or the oven door is opened. Nothing is wrong with the range.
On some Whirlpool models only. The steps use the CLOCK key; check your owner's manual if your control differs.
Most likely causes
| Cause | How likely | DIY-fixable? |
|---|---|---|
| Energy Save switched on, deliberately or by holding CLOCK | Very common | Yes — no tools |
What you can try yourself
- Make sure the oven is idle with the time of day showing; press any key to wake the display if it is blank.
- Press and hold CLOCK for 10 seconds.
- The control beeps and shows ES followed by Off twice, then returns to the time of day.
- If ES will not clear, turn the breaker(s) off for one minute and back on.
When to call a technician
- ES remains after the CLOCK procedure and a power reset.
- The display stays blank and no key wakes it.
- Keys do not respond at all.
Typical professional repair cost: No cost — this is a setting.
Frequently asked questions
Why is my Whirlpool oven display blank?
If Energy Save is active, the display goes blank after 5 idle minutes. Press any key or open the oven door to wake it.
How do I turn off ES mode?
Press and hold the CLOCK key for 10 seconds until the display shows ES followed by Off twice.
Is it ES or E5?
The display shows ES for Energy Save; on a seven-segment display the S looks like a 5.
Sources checked
Error meanings can vary by model. This guide was checked against the documentation above; use the manual for the model number on your own appliance when it differs.
Related Whirlpool codes
- Whirlpool Range F3 E0 F3 E0 on a Whirlpool-family range flags the oven temperature sensing circuit — Whirlpool's own description names the temperature sensor, the control, or the associated wiring. A one-minute breaker reset is the official first step.
- Whirlpool Range F3 E1 F3 E1 is the paired partner of F3 E0 on Whirlpool-family ranges: the same oven temperature sensing circuit, control, or wiring suspects, per Whirlpool's own page. A one-minute breaker reset is the official first step.
- Whirlpool Range F1 E0 F1 E0 on a Whirlpool-family range points at the oven control — Whirlpool's own page names the oven control or the associated wiring. A one-minute breaker reset is the official first step.
- Whirlpool Range F2 E0 F2 E0 on a Whirlpool-family range points at the user interface, the keypad, the control, or the wiring — the input side of the oven. Clean keys and a one-minute breaker reset first.
More: all Whirlpool range codes · all Whirlpool codes · search by symptom