Whirlpool Range F1-7 — What It Means & How to Fix It
Also shown as F1-9, F1-E on some models.
F1-7, F1-9 and F1-E indicate a possible oven control or wiring fault; switch the breaker off for one minute and call for service if the code persists.
What this code means
For F1-7, F1-9 and F1-E Whirlpool says there may be a problem with the oven control, or the associated wiring. No sensor or keypad is named, so the control board is the focus.
Dash-style codes from an older control design.
Most likely causes
| Cause | How likely | DIY-fixable? |
|---|---|---|
| Oven control failure | Common | No — technician job |
| Wiring to the control | Occasional | No — technician job |
| Glitch | Occasional | Yes — breaker reset |
What you can try yourself
- Press Cancel.
- Turn off the breaker(s) for one minute; turn back on.
- Watch for one minute.
- Call for service if the code returns.
When to call a technician
- Code persists.
- Oven will not start.
- Display abnormal.
Typical professional repair cost: Around $250–$500 for a control replacement.
Frequently asked questions
What does F1-E mean on a Whirlpool oven?
There may be a problem with the oven control, or the associated wiring — the same explanation Whirlpool gives F1-7 and F1-9.
Is this something I can repair?
Only the breaker reset is an owner step.
Does it affect the cooktop?
Whirlpool's article addresses the oven control. If cooktop elements also misbehave, tell the technician.
Sources checked
- Whirlpool Product Help: F1-7 - Error Code - Range
- Whirlpool Product Help: F1-9 - Error Code - Range
- Whirlpool Product Help: F1-E - Error Code - Range
Error meanings can vary by model. This guide was checked against the documentation above; use the manual for the model number on your own appliance when it differs.
Related Whirlpool codes
- Whirlpool Range F3 E0 F3 E0 on a Whirlpool-family range flags the oven temperature sensing circuit — Whirlpool's own description names the temperature sensor, the control, or the associated wiring. A one-minute breaker reset is the official first step.
- Whirlpool Range F3 E1 F3 E1 is the paired partner of F3 E0 on Whirlpool-family ranges: the same oven temperature sensing circuit, control, or wiring suspects, per Whirlpool's own page. A one-minute breaker reset is the official first step.
- Whirlpool Range F1 E0 F1 E0 on a Whirlpool-family range points at the oven control — Whirlpool's own page names the oven control or the associated wiring. A one-minute breaker reset is the official first step.
- Whirlpool Range F2 E0 F2 E0 on a Whirlpool-family range points at the user interface, the keypad, the control, or the wiring — the input side of the oven. Clean keys and a one-minute breaker reset first.
More: all Whirlpool range codes · all Whirlpool codes · search by symptom