Whirlpool Range F1 E1 — What It Means & How to Fix It
Also shown as F1E1, F1 E2, F1E2, F1 E5, F1E5 on some models.
F1 E1 — like F1 E2 and F1 E5 — means there may be a problem with the oven control or its wiring; reset the range at the breaker for one minute and book service if the code repeats.
What this code means
Whirlpool gives the same explanation for F1 E1, F1 E2 and F1 E5 on ranges: there may be a problem with the oven control, or the associated wiring. The oven control is the electronic board behind the console that runs the oven. Whirlpool's remedy is a one-minute breaker reset followed by a check that the code stays away.
F1 E1, F1 E2 and F1 E5 are separate codes that Whirlpool documents with identical wording. F1 E0 is covered in its own guide.
Most likely causes
| Cause | How likely | DIY-fixable? |
|---|---|---|
| Control glitch after a power event | Common | Yes — breaker reset |
| Failed oven control board | Common | No — technician job |
| Damaged or loose wiring to the control | Occasional | No — technician job |
What you can try yourself
- Cancel any cooking function.
- Switch off the breaker(s) feeding the range for one minute.
- Switch them back on and watch the display for one minute.
- Run a bake cycle to confirm normal operation.
- Schedule service if the code is displayed again.
When to call a technician
- The code reappears after the reset.
- The oven heats when nothing is selected — turn the breaker off and leave it off.
- Keys respond wrongly or not at all.
Typical professional repair cost: Oven control replacement typically costs $250–$500 with labor.
Frequently asked questions
Are F1 E1, F1 E2 and F1 E5 the same?
They are different codes, but Whirlpool describes all three the same way: a possible problem with the oven control or the associated wiring.
Can I replace the oven control myself?
This site does not recommend it. The control is connected to mains wiring, and on gas models to the gas system; leave it to a technician.
Will the breaker reset fix it for good?
Only if the cause was a one-off glitch. Whirlpool asks you to monitor the oven after the reset to see whether the code returns.
Sources checked
- Whirlpool Product Help: F1 E1 - Error Code - Range
- Whirlpool Product Help: F1 E2 - Error Code - Range
- Whirlpool Product Help: F1 E5 - Error Code - Range
Error meanings can vary by model. This guide was checked against the documentation above; use the manual for the model number on your own appliance when it differs.
Related Whirlpool codes
- Whirlpool Range F3 E0 F3 E0 on a Whirlpool-family range flags the oven temperature sensing circuit — Whirlpool's own description names the temperature sensor, the control, or the associated wiring. A one-minute breaker reset is the official first step.
- Whirlpool Range F3 E1 F3 E1 is the paired partner of F3 E0 on Whirlpool-family ranges: the same oven temperature sensing circuit, control, or wiring suspects, per Whirlpool's own page. A one-minute breaker reset is the official first step.
- Whirlpool Range F1 E0 F1 E0 on a Whirlpool-family range points at the oven control — Whirlpool's own page names the oven control or the associated wiring. A one-minute breaker reset is the official first step.
- Whirlpool Range F2 E0 F2 E0 on a Whirlpool-family range points at the user interface, the keypad, the control, or the wiring — the input side of the oven. Clean keys and a one-minute breaker reset first.
More: all Whirlpool range codes · all Whirlpool codes · search by symptom