Whirlpool Range F1 E7 — What It Means & How to Fix It
Also shown as F1E7, F1 E9, F1E9 on some models.
F1 E7 and F1 E9 indicate a possible fault in the appliance control board or its wiring — power the range down at the breaker for a minute, and arrange service if either code returns.
What this code means
For both F1 E7 and F1 E9 Whirlpool says there may be a problem with the appliance control board, or the associated wiring. Unlike the lower F1 codes, which name the oven control, these name the appliance control board. The owner-level response is the same breaker reset.
Whirlpool documents F1 E7 and F1 E9 separately with the same wording. Quote the exact code when booking service.
Most likely causes
| Cause | How likely | DIY-fixable? |
|---|---|---|
| Board needs a restart | Common | Yes — breaker reset |
| Appliance control board failure | Common | No — technician job |
| Harness fault at the board | Occasional | No — technician job |
What you can try yourself
- Stop cooking and press Cancel.
- Turn the range breaker(s) off for one minute, then on.
- Watch for the code for one minute.
- Verify the oven operates; if the code is back, call for service.
When to call a technician
- Code returns immediately or within a day.
- Display goes blank or resets on its own.
- Scorch marks or a hot-electronics smell near the console.
Typical professional repair cost: Expect $250–$500 for a control board replacement including labor.
Frequently asked questions
What is the appliance control board?
It is one of the electronic boards that runs the range. Whirlpool names it, with its wiring, as the possible problem behind F1 E7 and F1 E9.
How do I clear F1 E7?
Turn off the circuit breaker(s) for one minute, restore power, and monitor the display for one minute.
Is F1 E9 different from F1 E7?
They are separate codes with the same published description and the same reset.
Sources checked
- Whirlpool Product Help: F1 E7 - Error Code - Range
- Whirlpool Product Help: F1 E9 - Error Code - Range
Error meanings can vary by model. This guide was checked against the documentation above; use the manual for the model number on your own appliance when it differs.
Related Whirlpool codes
- Whirlpool Range F3 E0 F3 E0 on a Whirlpool-family range flags the oven temperature sensing circuit — Whirlpool's own description names the temperature sensor, the control, or the associated wiring. A one-minute breaker reset is the official first step.
- Whirlpool Range F3 E1 F3 E1 is the paired partner of F3 E0 on Whirlpool-family ranges: the same oven temperature sensing circuit, control, or wiring suspects, per Whirlpool's own page. A one-minute breaker reset is the official first step.
- Whirlpool Range F1 E0 F1 E0 on a Whirlpool-family range points at the oven control — Whirlpool's own page names the oven control or the associated wiring. A one-minute breaker reset is the official first step.
- Whirlpool Range F2 E0 F2 E0 on a Whirlpool-family range points at the user interface, the keypad, the control, or the wiring — the input side of the oven. Clean keys and a one-minute breaker reset first.
More: all Whirlpool range codes · all Whirlpool codes · search by symptom