Whirlpool Range F3 E2 — What It Means & How to Fix It
Also shown as F3E2 on some models.
F3 E2 means there may be a problem with the oven temperature sensor, the warming drawer sensor on models that have one, or the wiring — reset power for a minute and book service if it returns.
What this code means
Whirlpool says F3 E2 may indicate a problem with the oven temperature sensor, the warming drawer sensor (if so equipped), or the associated wiring. These sensors report temperature to the control; when a reading is missing or implausible the control raises an F3 code.
The warming drawer sensor only applies to ranges with a warming drawer. F3 E0 and F3 E1 have their own guides.
Most likely causes
| Cause | How likely | DIY-fixable? |
|---|---|---|
| Oven temperature sensor out of range | Common | No — technician job |
| Warming drawer sensor fault (if equipped) | Occasional | No — technician job |
| Loose or damaged sensor wiring | Occasional | No — technician job |
| Momentary misread | Occasional | Yes — breaker reset |
What you can try yourself
- Turn off the oven and warming drawer and let them cool.
- Switch the range breaker(s) off for one minute, then on.
- Watch the display for one minute.
- Try a bake cycle. If F3 E2 returns, schedule service.
When to call a technician
- The code returns once the oven or drawer starts heating.
- Food burns or undercooks at normal settings.
- The oven overheats or will not shut off — turn off the breaker.
Typical professional repair cost: Sensor replacement typically costs $120–$250 including labor.
Frequently asked questions
What is the oven temperature sensor?
A probe inside the oven cavity that reports the temperature to the control. Whirlpool lists it as a possible cause of F3 E2.
My range has no warming drawer — does F3 E2 still apply?
Yes. Whirlpool names the warming drawer sensor only "if so equipped"; the oven sensor and wiring remain possible causes.
Can I bake with F3 E2 showing?
Not reliably. The control cannot trust its temperature reading, so have it checked first.
Sources checked
Error meanings can vary by model. This guide was checked against the documentation above; use the manual for the model number on your own appliance when it differs.
Related Whirlpool codes
- Whirlpool Range F3 E0 F3 E0 on a Whirlpool-family range flags the oven temperature sensing circuit — Whirlpool's own description names the temperature sensor, the control, or the associated wiring. A one-minute breaker reset is the official first step.
- Whirlpool Range F3 E1 F3 E1 is the paired partner of F3 E0 on Whirlpool-family ranges: the same oven temperature sensing circuit, control, or wiring suspects, per Whirlpool's own page. A one-minute breaker reset is the official first step.
- Whirlpool Range F1 E0 F1 E0 on a Whirlpool-family range points at the oven control — Whirlpool's own page names the oven control or the associated wiring. A one-minute breaker reset is the official first step.
- Whirlpool Range F2 E0 F2 E0 on a Whirlpool-family range points at the user interface, the keypad, the control, or the wiring — the input side of the oven. Clean keys and a one-minute breaker reset first.
More: all Whirlpool range codes · all Whirlpool codes · search by symptom