Whirlpool Range F3 — What It Means & How to Fix It
Also shown as F6 on some models.
A plain F3 or F6 on a Whirlpool range indicates a possible problem with the oven control or its wiring — reset at the breaker for one minute and call for service if the code remains.
What this code means
Whirlpool says that with the single-number codes F3 and F6 there may be a problem with the oven control, or the associated wiring. Note that this differs from the two-part F3 codes, which mostly concern the temperature sensor.
For displays showing only F3 or F6. Codes such as F3 E0 or F6 E1 are different and have their own guides.
Most likely causes
| Cause | How likely | DIY-fixable? |
|---|---|---|
| Oven control fault | Common | No — technician job |
| Wiring fault at the control | Occasional | No — technician job |
| One-off glitch | Occasional | Yes — breaker reset |
What you can try yourself
- Cancel the oven function.
- Breaker(s) off for one minute, then back on.
- Monitor the display for one minute.
- Verify the oven works; book service if F3 or F6 shows again.
When to call a technician
- Code returns after the reset.
- Oven does not respond to the keypad.
- Oven heats unexpectedly.
Typical professional repair cost: Oven control replacement typically costs $250–$500 with labor.
Frequently asked questions
What is a plain F3 code on a Whirlpool range?
Whirlpool says there may be a problem with the oven control, or the associated wiring.
Does F3 mean the temperature sensor?
The two-part codes F3 E0 to F3 E3 point to sensors. The plain F3 code is attributed by Whirlpool to the oven control.
What about F6 on its own?
Whirlpool gives it the same oven control explanation.
Sources checked
Error meanings can vary by model. This guide was checked against the documentation above; use the manual for the model number on your own appliance when it differs.
Related Whirlpool codes
- Whirlpool Range F3 E0 F3 E0 on a Whirlpool-family range flags the oven temperature sensing circuit — Whirlpool's own description names the temperature sensor, the control, or the associated wiring. A one-minute breaker reset is the official first step.
- Whirlpool Range F3 E1 F3 E1 is the paired partner of F3 E0 on Whirlpool-family ranges: the same oven temperature sensing circuit, control, or wiring suspects, per Whirlpool's own page. A one-minute breaker reset is the official first step.
- Whirlpool Range F1 E0 F1 E0 on a Whirlpool-family range points at the oven control — Whirlpool's own page names the oven control or the associated wiring. A one-minute breaker reset is the official first step.
- Whirlpool Range F2 E0 F2 E0 on a Whirlpool-family range points at the user interface, the keypad, the control, or the wiring — the input side of the oven. Clean keys and a one-minute breaker reset first.
More: all Whirlpool range codes · all Whirlpool codes · search by symptom