Whirlpool Range F5 E0 — What It Means & How to Fix It
Also shown as F5E0, F5 E7, F5E7 on some models.
F5 E0 and F5 E7 point to the oven door latch assembly, the door switch or their wiring — close the door fully, reset the breaker for a minute, and call service if the code remains.
What this code means
Whirlpool says that with F5 E0 or F5 E7 there may be a problem with the oven door latch assembly, the door switch, or the associated wiring. The latch locks the door for self-cleaning and the switch tells the control whether the door is shut; the control has received a signal from them that does not add up.
Whirlpool gives F5 E0 and F5 E7 the same description. F5 E1 to F5 E3 refer specifically to the main oven door latch.
Most likely causes
| Cause | How likely | DIY-fixable? |
|---|---|---|
| Door not fully closed or blocked by a rack or pan | Common | Yes — no tools |
| Door latch assembly fault | Common | No — technician job |
| Door switch or wiring fault | Occasional | No — technician job |
What you can try yourself
- Check that racks and cookware are not stopping the door from closing.
- Close the door firmly.
- Turn the breaker(s) off for one minute, then back on.
- Monitor for one minute. Do not force a locked door open.
- Schedule service if the code is displayed again.
When to call a technician
- The door is locked and will not release after the oven has cooled and power has been reset.
- The code returns each time self-clean is selected.
- The latch is visibly bent or jammed.
Typical professional repair cost: Door latch assembly replacement generally costs $150–$300 with labor.
Frequently asked questions
What does F5 E0 mean on a Whirlpool oven?
There may be a problem with the oven door latch assembly, the door switch, or the associated wiring.
My oven door is stuck locked — what should I do?
Let the oven cool completely and reset power at the breaker for one minute. If it stays locked, call for service rather than forcing it.
Can I still bake with an F5 code?
Not until it clears. The control needs a valid door signal before it will run normally.
Sources checked
- Whirlpool Product Help: F5 E0 - Error Code - Range
- Whirlpool Product Help: F5 E7 - Error Code - Range
Error meanings can vary by model. This guide was checked against the documentation above; use the manual for the model number on your own appliance when it differs.
Related Whirlpool codes
- Whirlpool Range F3 E0 F3 E0 on a Whirlpool-family range flags the oven temperature sensing circuit — Whirlpool's own description names the temperature sensor, the control, or the associated wiring. A one-minute breaker reset is the official first step.
- Whirlpool Range F3 E1 F3 E1 is the paired partner of F3 E0 on Whirlpool-family ranges: the same oven temperature sensing circuit, control, or wiring suspects, per Whirlpool's own page. A one-minute breaker reset is the official first step.
- Whirlpool Range F1 E0 F1 E0 on a Whirlpool-family range points at the oven control — Whirlpool's own page names the oven control or the associated wiring. A one-minute breaker reset is the official first step.
- Whirlpool Range F2 E0 F2 E0 on a Whirlpool-family range points at the user interface, the keypad, the control, or the wiring — the input side of the oven. Clean keys and a one-minute breaker reset first.
More: all Whirlpool range codes · all Whirlpool codes · search by symptom