Whirlpool Range F6 E1 — What It Means & How to Fix It
Also shown as F6E1, F6 E3, F6E3 on some models.
F6 E1 and F6 E3 point to the Appliance Manager board or its wiring; Whirlpool notes several things can cause it, so cycle the breaker for one minute and schedule service if it repeats.
What this code means
Whirlpool says that with F6 E1 or F6 E3 there may be a problem with the Appliance Manager, or the associated wiring, adding that there are a variety of different reasons this may be happening. That makes these codes ones to diagnose rather than guess at.
F6 E1 and F6 E3 carry the same Whirlpool text.
Most likely causes
| Cause | How likely | DIY-fixable? |
|---|---|---|
| Temporary communication fault | Common | Yes — breaker reset |
| Appliance Manager board fault | Occasional | No — technician job |
| Wiring or connector problem | Occasional | No — technician job |
What you can try yourself
- Stop any cooking function.
- Breaker(s) off for one minute, then on.
- Watch the display for one minute.
- Run a bake cycle to verify operation, and book service if the code reappears.
When to call a technician
- The code keeps coming back.
- It appears alongside other F codes.
- The range loses its settings or clock repeatedly.
Typical professional repair cost: Usually $250–$500 if a board is replaced; less for a wiring repair.
Frequently asked questions
Why does Whirlpool say there are a variety of reasons for F6 E1?
Its article names the Appliance Manager and wiring and says a variety of different reasons may be responsible, without listing them. A technician has to narrow it down.
Is F6 E3 the same as F6 E1?
Different codes, same published explanation and reset.
Can I keep using the cooktop?
If the code clears and stays clear, yes. If it persists, wait for service.
Sources checked
- Whirlpool Product Help: F6 E1 - Error Code - Range
- Whirlpool Product Help: F6 E3 - Error Code - Range
Error meanings can vary by model. This guide was checked against the documentation above; use the manual for the model number on your own appliance when it differs.
Related Whirlpool codes
- Whirlpool Range F3 E0 F3 E0 on a Whirlpool-family range flags the oven temperature sensing circuit — Whirlpool's own description names the temperature sensor, the control, or the associated wiring. A one-minute breaker reset is the official first step.
- Whirlpool Range F3 E1 F3 E1 is the paired partner of F3 E0 on Whirlpool-family ranges: the same oven temperature sensing circuit, control, or wiring suspects, per Whirlpool's own page. A one-minute breaker reset is the official first step.
- Whirlpool Range F1 E0 F1 E0 on a Whirlpool-family range points at the oven control — Whirlpool's own page names the oven control or the associated wiring. A one-minute breaker reset is the official first step.
- Whirlpool Range F2 E0 F2 E0 on a Whirlpool-family range points at the user interface, the keypad, the control, or the wiring — the input side of the oven. Clean keys and a one-minute breaker reset first.
More: all Whirlpool range codes · all Whirlpool codes · search by symptom