Whirlpool Range F6 E5 — What It Means & How to Fix It
Also shown as F6E5, F6 EA, F6EA on some models.
F6 E5 and F6 EA mean there may be a problem with the range's user interface or its wiring — reset at the breaker for one minute and get service if the code persists.
What this code means
Whirlpool attributes F6 E5 and F6 EA to the user interface, or the associated wiring. The user interface is the display and touch panel assembly. Whirlpool lists the standard power reset and nothing further for owners.
Two codes, one description. F8 EA has the same wording and its own guide.
Most likely causes
| Cause | How likely | DIY-fixable? |
|---|---|---|
| User interface glitch | Common | Yes — breaker reset |
| User interface board failure | Common | No — technician job |
| Ribbon cable or harness fault | Occasional | No — technician job |
What you can try yourself
- Dry and clean the control panel.
- Turn the breaker(s) off for one minute, then on.
- Monitor for one minute and test the keys.
- Schedule service if the code returns.
When to call a technician
- Code persists after reset.
- Touch panel does not respond.
- Display is dim, partial or blank.
Typical professional repair cost: User interface replacement commonly costs $200–$450 with labor.
Frequently asked questions
What is the user interface on a range?
The touch panel and display you use to set the oven. Whirlpool names it as the possible problem for F6 E5 and F6 EA.
How do I reset it?
Turn off the range's circuit breaker(s) for one minute and turn them back on.
Is F6 EA a typo for F6 E4?
No. Whirlpool documents F6 EA as its own code, with the same user interface explanation as F6 E5.
Sources checked
- Whirlpool Product Help: F6 E5 - Error Code - Range
- Whirlpool Product Help: F6 EA - Error Code - Range
Error meanings can vary by model. This guide was checked against the documentation above; use the manual for the model number on your own appliance when it differs.
Related Whirlpool codes
- Whirlpool Range F3 E0 F3 E0 on a Whirlpool-family range flags the oven temperature sensing circuit — Whirlpool's own description names the temperature sensor, the control, or the associated wiring. A one-minute breaker reset is the official first step.
- Whirlpool Range F3 E1 F3 E1 is the paired partner of F3 E0 on Whirlpool-family ranges: the same oven temperature sensing circuit, control, or wiring suspects, per Whirlpool's own page. A one-minute breaker reset is the official first step.
- Whirlpool Range F1 E0 F1 E0 on a Whirlpool-family range points at the oven control — Whirlpool's own page names the oven control or the associated wiring. A one-minute breaker reset is the official first step.
- Whirlpool Range F2 E0 F2 E0 on a Whirlpool-family range points at the user interface, the keypad, the control, or the wiring — the input side of the oven. Clean keys and a one-minute breaker reset first.
More: all Whirlpool range codes · all Whirlpool codes · search by symptom