Whirlpool Range F7 E0 — What It Means & How to Fix It
Also shown as F7E0 on some models.
F7 E0 points to the oven door latch assembly or its wiring: shut the door fully, reset the breaker for a minute, and call service if the code or a locked door remains.
What this code means
Whirlpool says F7 E0 may indicate a problem with the oven door latch assembly or the associated wiring. The latch is the motor-driven lock used for self-cleaning.
Whirlpool range code. F7 E1 concerns the door switch rather than the latch.
Most likely causes
| Cause | How likely | DIY-fixable? |
|---|---|---|
| Latch stuck partway after a self-clean | Common | Yes — breaker reset |
| Failed door latch assembly | Common | No — technician job |
| Wiring fault to the latch | Occasional | No — technician job |
What you can try yourself
- Let the oven cool if it was hot.
- Close the door completely.
- Turn off the breaker(s) for one minute and restore power.
- Watch for one minute; try opening the door gently.
- Call for service if F7 E0 remains.
When to call a technician
- Door will not unlock on a cool oven.
- Code returns after every reset.
- Latch hook is visibly out of position.
Typical professional repair cost: About $150–$300 for a latch assembly replacement with labor.
Frequently asked questions
What does F7 E0 mean?
There may be a problem with the oven door latch assembly or the associated wiring.
Can I force the oven door open?
No — you can break the latch and the door. Cool the oven, reset power, and call service if it stays locked.
Is F7 E0 a heating fault?
No. Whirlpool ties it to the door latch.
Sources checked
Error meanings can vary by model. This guide was checked against the documentation above; use the manual for the model number on your own appliance when it differs.
Related Whirlpool codes
- Whirlpool Range F3 E0 F3 E0 on a Whirlpool-family range flags the oven temperature sensing circuit — Whirlpool's own description names the temperature sensor, the control, or the associated wiring. A one-minute breaker reset is the official first step.
- Whirlpool Range F3 E1 F3 E1 is the paired partner of F3 E0 on Whirlpool-family ranges: the same oven temperature sensing circuit, control, or wiring suspects, per Whirlpool's own page. A one-minute breaker reset is the official first step.
- Whirlpool Range F1 E0 F1 E0 on a Whirlpool-family range points at the oven control — Whirlpool's own page names the oven control or the associated wiring. A one-minute breaker reset is the official first step.
- Whirlpool Range F2 E0 F2 E0 on a Whirlpool-family range points at the user interface, the keypad, the control, or the wiring — the input side of the oven. Clean keys and a one-minute breaker reset first.
More: all Whirlpool range codes · all Whirlpool codes · search by symptom