Whirlpool Range F7 E5 — What It Means & How to Fix It
Also shown as F7E5, F7 E6, F7E6 on some models.
F7 E5 and F7 E6 indicate a possible fault with the cooling fan or its wiring — reset the breaker for one minute, and arrange service if either code returns.
What this code means
Whirlpool says that with F7 E5 or F7 E6 there may be a problem with the cooling fan, or the associated wiring. The cooling fan protects the electronics by moving air through the control area while the oven is hot.
Same Whirlpool wording for both codes. Speed-specific fan codes are F8 E0 (too low) and F8 E2 (too high).
Most likely causes
| Cause | How likely | DIY-fixable? |
|---|---|---|
| Cooling fan motor failed or seized | Common | No — technician job |
| Fan wiring or connector fault | Occasional | No — technician job |
| One-off control misread | Occasional | Yes — breaker reset |
What you can try yourself
- Turn the oven off and let it cool.
- Make sure vents on the range are not covered.
- Reset power: breaker(s) off for one minute, then on.
- Monitor for one minute; if the code returns, stop using the oven and schedule service.
When to call a technician
- No fan sound at all while the oven is hot.
- Scraping or rattling from the fan.
- Control panel becomes very hot to the touch.
Typical professional repair cost: Cooling fan replacement usually runs $150–$300 with labor.
Frequently asked questions
What is the cooling fan in a range for?
It moves air past the controls so they do not overheat while the oven is hot.
Can I use the oven with F7 E5?
Not until it is resolved — without cooling the electronics can overheat.
Is the cooling fan the same as the convection fan?
No. The convection fan circulates air inside the oven; the cooling fan is outside the cavity.
Sources checked
- Whirlpool Product Help: F7 E5 - Error Code - Range
- Whirlpool Product Help: F7 E6 - Error Code - Range
Error meanings can vary by model. This guide was checked against the documentation above; use the manual for the model number on your own appliance when it differs.
Related Whirlpool codes
- Whirlpool Range F3 E0 F3 E0 on a Whirlpool-family range flags the oven temperature sensing circuit — Whirlpool's own description names the temperature sensor, the control, or the associated wiring. A one-minute breaker reset is the official first step.
- Whirlpool Range F3 E1 F3 E1 is the paired partner of F3 E0 on Whirlpool-family ranges: the same oven temperature sensing circuit, control, or wiring suspects, per Whirlpool's own page. A one-minute breaker reset is the official first step.
- Whirlpool Range F1 E0 F1 E0 on a Whirlpool-family range points at the oven control — Whirlpool's own page names the oven control or the associated wiring. A one-minute breaker reset is the official first step.
- Whirlpool Range F2 E0 F2 E0 on a Whirlpool-family range points at the user interface, the keypad, the control, or the wiring — the input side of the oven. Clean keys and a one-minute breaker reset first.
More: all Whirlpool range codes · all Whirlpool codes · search by symptom