Whirlpool Range F8 E0 — What It Means & How to Fix It
Also shown as F8E0 on some models.
F8 E0 means the cooling fan speed is too low, which may come from restricted airflow, the cooling fan itself, or its wiring — clear the vents, reset the breaker, and call service if it comes back.
What this code means
Whirlpool defines F8 E0 as cooling fan speed too low, and says there may be a problem with an airflow restriction, the oven cooling fan, or the associated wiring. Airflow restriction is the one cause an owner can look at.
Whirlpool range code. The opposite condition, fan speed too high, is F8 E2.
Most likely causes
| Cause | How likely | DIY-fixable? |
|---|---|---|
| Vents blocked or the range installed without proper clearance | Common | Yes — no tools |
| Cooling fan slowing or failing | Common | No — technician job |
| Wiring fault to the fan | Occasional | No — technician job |
What you can try yourself
- Let the oven cool.
- Check the oven vent and any openings around the console are not covered by foil, cookware or towels.
- Turn the breaker(s) off for one minute, then on.
- Run the oven and listen for the fan; call for service if F8 E0 returns.
When to call a technician
- Code repeats with all vents clear.
- Fan is noisy or silent.
- Oven shuts down mid-cycle.
Typical professional repair cost: Roughly $150–$300 for a cooling fan replacement with labor.
Frequently asked questions
What does cooling fan speed too low mean?
The control measured the oven cooling fan turning slower than expected. Whirlpool lists airflow restriction, the fan, or wiring as possible problems.
What could restrict airflow on a range?
Anything covering the vents — foil, pans stored on the cooktop, or an installation that crowds the range.
Will F8 E0 stop the oven?
Whirlpool's article does not say. Treat the code as a reason not to run long or hot cycles until it is fixed.
Sources checked
Error meanings can vary by model. This guide was checked against the documentation above; use the manual for the model number on your own appliance when it differs.
Related Whirlpool codes
- Whirlpool Range F3 E0 F3 E0 on a Whirlpool-family range flags the oven temperature sensing circuit — Whirlpool's own description names the temperature sensor, the control, or the associated wiring. A one-minute breaker reset is the official first step.
- Whirlpool Range F3 E1 F3 E1 is the paired partner of F3 E0 on Whirlpool-family ranges: the same oven temperature sensing circuit, control, or wiring suspects, per Whirlpool's own page. A one-minute breaker reset is the official first step.
- Whirlpool Range F1 E0 F1 E0 on a Whirlpool-family range points at the oven control — Whirlpool's own page names the oven control or the associated wiring. A one-minute breaker reset is the official first step.
- Whirlpool Range F2 E0 F2 E0 on a Whirlpool-family range points at the user interface, the keypad, the control, or the wiring — the input side of the oven. Clean keys and a one-minute breaker reset first.
More: all Whirlpool range codes · all Whirlpool codes · search by symptom