Whirlpool Range F8 — What It Means & How to Fix It
A plain F8 on a Whirlpool range concerns the meat probe: make sure it is securely inserted in its receptacle, or remove it if unused, then reset power.
What this code means
For the single-number F8 code, Whirlpool's instruction is to verify the meat probe is securely inserted in the meat probe receptacle. The control is not receiving a usable probe signal.
For a display reading only F8 on ranges with a meat probe. F8 E0 and F8 E2 are cooling fan codes.
Most likely causes
| Cause | How likely | DIY-fixable? |
|---|---|---|
| Probe plug loose in the receptacle | Very common | Yes — no tools |
| Damaged probe | Common | Yes — replace probe |
| Receptacle or wiring fault | Occasional | No — technician job |
What you can try yourself
- Press the probe plug fully into the receptacle inside the oven.
- If you are not cooking with the probe, take it out of the oven.
- Turn the breaker(s) off for one minute and back on.
- Call for service if F8 shows with no probe connected.
When to call a technician
- F8 with the probe removed.
- Probe cable burnt or kinked.
- Code returns after a reset.
Typical professional repair cost: A new probe costs about $20–$60; receptacle repairs $120–$250.
Frequently asked questions
What does F8 mean on a Whirlpool range?
When only F8 is shown, Whirlpool directs you to verify the meat probe is securely inserted in its receptacle.
I do not use the meat probe — why F8?
Remove the probe completely and reset power. If the code stays, the receptacle or wiring needs checking.
Is F8 the same as F8 E0?
No. F8 E0 is cooling fan speed too low.
Sources checked
Error meanings can vary by model. This guide was checked against the documentation above; use the manual for the model number on your own appliance when it differs.
Related Whirlpool codes
- Whirlpool Range F3 E0 F3 E0 on a Whirlpool-family range flags the oven temperature sensing circuit — Whirlpool's own description names the temperature sensor, the control, or the associated wiring. A one-minute breaker reset is the official first step.
- Whirlpool Range F3 E1 F3 E1 is the paired partner of F3 E0 on Whirlpool-family ranges: the same oven temperature sensing circuit, control, or wiring suspects, per Whirlpool's own page. A one-minute breaker reset is the official first step.
- Whirlpool Range F1 E0 F1 E0 on a Whirlpool-family range points at the oven control — Whirlpool's own page names the oven control or the associated wiring. A one-minute breaker reset is the official first step.
- Whirlpool Range F2 E0 F2 E0 on a Whirlpool-family range points at the user interface, the keypad, the control, or the wiring — the input side of the oven. Clean keys and a one-minute breaker reset first.
More: all Whirlpool range codes · all Whirlpool codes · search by symptom