Whirlpool Range F9-1 — What It Means & How to Fix It
Also shown as F9-2, F9-3 on some models.
F9-1, F9-2 and F9-3 point to the oven door latch, the door lock switch, or their wiring; reset the breaker for one minute and call service if the code or a locked door remains.
What this code means
For all three F9 dash codes Whirlpool says there may be a problem with the oven door latch, the door lock switch, or the associated wiring.
Dash-style codes on Whirlpool ranges.
Most likely causes
| Cause | How likely | DIY-fixable? |
|---|---|---|
| Door latch fault | Common | No — technician job |
| Door lock switch fault | Common | No — technician job |
| Latch out of position | Occasional | Yes — breaker reset |
What you can try yourself
- Cool the oven.
- Turn off the breaker(s) for one minute and restore power.
- Watch the display and try the door.
- Schedule service if unresolved.
When to call a technician
- Locked door.
- Repeat code.
- Latch noise without movement.
Typical professional repair cost: Typically $150–$300.
Frequently asked questions
What do the F9 codes mean on a Whirlpool range?
F9-1, F9-2 and F9-3 each indicate a possible problem with the oven door latch, the door lock switch, or the associated wiring.
How do I clear F9-1?
Reset power at the breaker for one minute.
Is it safe to self-clean?
Not until the latch has been checked.
Sources checked
- Whirlpool Product Help: F9-1 - Error Code - Range
- Whirlpool Product Help: F9-2 - Error Code - Range
- Whirlpool Product Help: F9-3 - Error Code - Range
Error meanings can vary by model. This guide was checked against the documentation above; use the manual for the model number on your own appliance when it differs.
Related Whirlpool codes
- Whirlpool Range F3 E0 F3 E0 on a Whirlpool-family range flags the oven temperature sensing circuit — Whirlpool's own description names the temperature sensor, the control, or the associated wiring. A one-minute breaker reset is the official first step.
- Whirlpool Range F3 E1 F3 E1 is the paired partner of F3 E0 on Whirlpool-family ranges: the same oven temperature sensing circuit, control, or wiring suspects, per Whirlpool's own page. A one-minute breaker reset is the official first step.
- Whirlpool Range F1 E0 F1 E0 on a Whirlpool-family range points at the oven control — Whirlpool's own page names the oven control or the associated wiring. A one-minute breaker reset is the official first step.
- Whirlpool Range F2 E0 F2 E0 on a Whirlpool-family range points at the user interface, the keypad, the control, or the wiring — the input side of the oven. Clean keys and a one-minute breaker reset first.
More: all Whirlpool range codes · all Whirlpool codes · search by symptom