Whirlpool Range FC E1 — What It Means & How to Fix It
Also shown as FCE1, FC E2, FCE2, FC E3, FCE3 on some models.
FC E1, FC E2 and FC E3 mean the range could not connect to your Wi-Fi router — restart the router and the range, and improve the signal where the range sits.
What this code means
Whirlpool says these codes mean the appliance could not connect to the router, possibly because of a connection time-out, poor signal strength, a failed router, the Wi-Fi module in the appliance, or wiring. There is no link between the Wi-Fi module and the wireless router. Cooking functions are a separate matter from this connection.
Only on Whirlpool connected (Wi-Fi) ranges.
Most likely causes
| Cause | How likely | DIY-fixable? |
|---|---|---|
| Router needs restarting | Very common | Yes — no tools |
| Weak Wi-Fi signal at the range | Common | Yes — move router or add extender |
| Connection time-out during setup | Common | Yes — retry |
| Wi-Fi module in the range faulty | Less common | No — technician job |
What you can try yourself
- Take a phone to the range and check it has a strong Wi-Fi signal there.
- Unplug the router for 2 minutes and plug it back in.
- Turn the range breaker(s) off for 2 minutes, then on.
- If the signal is weak, move the router, add a compatible extender, or contact your internet provider.
- Still failing? Whirlpool's connected appliance line is 1-866-333-4591.
When to call a technician
- Other devices connect fine at the range but it will not.
- The code returns after router and range restarts.
- Wi-Fi settings on the range are unavailable.
Typical professional repair cost: Usually free. A Wi-Fi module replacement, if needed, is roughly $150–$300.
Frequently asked questions
Can I still cook with an FC code?
FC codes concern the Wi-Fi connection. Whirlpool's article deals only with connectivity, not with oven operation.
How do I reconnect my Whirlpool range to Wi-Fi?
Restart the router (2 minutes unplugged), then power the range off for 2 minutes at the breaker and reconnect.
Why does it say poor signal?
Kitchens are often far from the router. Check for full bars on a phone at the range; move the router or use an extender if not.
Sources checked
- Whirlpool Product Help: FC E1 - Error Code - Range
- Whirlpool Product Help: FC E2 - Error Code - Range
- Whirlpool Product Help: FC E3 - Error Code - Range
Error meanings can vary by model. This guide was checked against the documentation above; use the manual for the model number on your own appliance when it differs.
Related Whirlpool codes
- Whirlpool Range F3 E0 F3 E0 on a Whirlpool-family range flags the oven temperature sensing circuit — Whirlpool's own description names the temperature sensor, the control, or the associated wiring. A one-minute breaker reset is the official first step.
- Whirlpool Range F3 E1 F3 E1 is the paired partner of F3 E0 on Whirlpool-family ranges: the same oven temperature sensing circuit, control, or wiring suspects, per Whirlpool's own page. A one-minute breaker reset is the official first step.
- Whirlpool Range F1 E0 F1 E0 on a Whirlpool-family range points at the oven control — Whirlpool's own page names the oven control or the associated wiring. A one-minute breaker reset is the official first step.
- Whirlpool Range F2 E0 F2 E0 on a Whirlpool-family range points at the user interface, the keypad, the control, or the wiring — the input side of the oven. Clean keys and a one-minute breaker reset first.
More: all Whirlpool range codes · all Whirlpool codes · search by symptom