Whirlpool Range FC E4 — What It Means & How to Fix It
Also shown as FCE4, FC E5, FCE5 on some models.
FC E4 and FC E5 point to the range's Wi-Fi antenna or its wiring; power the range off at the breaker for a minute and contact Whirlpool connected-appliance support if the code stays.
What this code means
Whirlpool says that with FC E4 or FC E5 there may be a problem with the Wi-Fi antenna, or the associated wiring. This is hardware inside the range rather than your home network.
Connected Whirlpool ranges only; same wording for both codes.
Most likely causes
| Cause | How likely | DIY-fixable? |
|---|---|---|
| Wi-Fi hardware needs a restart | Common | Yes — breaker reset |
| Wi-Fi antenna or its cable faulty | Common | No — technician job |
What you can try yourself
- Turn the breaker(s) off for one minute, then on.
- Monitor the display for one minute.
- Verify the range works and try reconnecting to Wi-Fi.
- If the code returns, call Whirlpool connected appliance support on 1-866-333-4591.
When to call a technician
- Code returns after reset.
- Range cannot see any Wi-Fi networks.
- Other F codes appear with it.
Typical professional repair cost: A Wi-Fi component repair typically costs $150–$300.
Frequently asked questions
Is FC E4 a problem with my router?
Whirlpool points to the Wi-Fi antenna in the appliance or its wiring, not the router.
Who do I call about FC E4?
Whirlpool lists 1-866-333-4591 for help with connected appliances.
Does FC E5 mean the same?
Yes — Whirlpool uses the same description for both.
Sources checked
- Whirlpool Product Help: FC E4 - Error Code - Range
- Whirlpool Product Help: FC E5 - Error Code - Range
Error meanings can vary by model. This guide was checked against the documentation above; use the manual for the model number on your own appliance when it differs.
Related Whirlpool codes
- Whirlpool Range F3 E0 F3 E0 on a Whirlpool-family range flags the oven temperature sensing circuit — Whirlpool's own description names the temperature sensor, the control, or the associated wiring. A one-minute breaker reset is the official first step.
- Whirlpool Range F3 E1 F3 E1 is the paired partner of F3 E0 on Whirlpool-family ranges: the same oven temperature sensing circuit, control, or wiring suspects, per Whirlpool's own page. A one-minute breaker reset is the official first step.
- Whirlpool Range F1 E0 F1 E0 on a Whirlpool-family range points at the oven control — Whirlpool's own page names the oven control or the associated wiring. A one-minute breaker reset is the official first step.
- Whirlpool Range F2 E0 F2 E0 on a Whirlpool-family range points at the user interface, the keypad, the control, or the wiring — the input side of the oven. Clean keys and a one-minute breaker reset first.
More: all Whirlpool range codes · all Whirlpool codes · search by symptom