Whirlpool Range FC E6 — What It Means & How to Fix It
Also shown as FCE6, FC E9, FCE9 on some models.
FC E6 and FC E9 indicate a possible fault in the Wi-Fi power module or its wiring — reset at the breaker for one minute and seek service if the code is still present.
What this code means
For FC E6 and FC E9 Whirlpool says there may be a problem with the Wi-Fi power module, or the associated wiring. The module supplies the range's connectivity hardware.
Connected Whirlpool ranges only.
Most likely causes
| Cause | How likely | DIY-fixable? |
|---|---|---|
| Module needs restarting | Common | Yes — breaker reset |
| Wi-Fi power module failed | Common | No — technician job |
| Wiring fault | Occasional | No — technician job |
What you can try yourself
- Breaker(s) off for one minute, then back on.
- Watch for the code for one minute.
- Verify appliance operation.
- Contact Whirlpool or schedule service if it returns.
When to call a technician
- Code returns.
- Wi-Fi features unavailable in the range menu.
- Display resets when Wi-Fi is enabled.
Typical professional repair cost: Roughly $150–$300 for a module replacement with labor.
Frequently asked questions
What is the Wi-Fi power module?
A component that powers the range's Wi-Fi hardware. Whirlpool names it as the possible problem for FC E6 and FC E9.
Will the oven still heat?
Whirlpool's article addresses only the Wi-Fi fault; it asks you to verify appliance operation after the reset.
How do I reset it?
Turn the circuit breaker(s) off for one minute and back on.
Sources checked
- Whirlpool Product Help: FC E6 - Error Code - Range
- Whirlpool Product Help: FC E9 - Error Code - Range
Error meanings can vary by model. This guide was checked against the documentation above; use the manual for the model number on your own appliance when it differs.
Related Whirlpool codes
- Whirlpool Range F3 E0 F3 E0 on a Whirlpool-family range flags the oven temperature sensing circuit — Whirlpool's own description names the temperature sensor, the control, or the associated wiring. A one-minute breaker reset is the official first step.
- Whirlpool Range F3 E1 F3 E1 is the paired partner of F3 E0 on Whirlpool-family ranges: the same oven temperature sensing circuit, control, or wiring suspects, per Whirlpool's own page. A one-minute breaker reset is the official first step.
- Whirlpool Range F1 E0 F1 E0 on a Whirlpool-family range points at the oven control — Whirlpool's own page names the oven control or the associated wiring. A one-minute breaker reset is the official first step.
- Whirlpool Range F2 E0 F2 E0 on a Whirlpool-family range points at the user interface, the keypad, the control, or the wiring — the input side of the oven. Clean keys and a one-minute breaker reset first.
More: all Whirlpool range codes · all Whirlpool codes · search by symptom