Whirlpool Range FC E8 — What It Means & How to Fix It
Also shown as FCE8, Registration Error on some models.
FC E8 is a registration error that appears when the SAID number, appliance type or model number was entered incorrectly during connected setup — re-enter them carefully.
What this code means
Whirlpool explains that a Registration Error appears if the SAID number was entered incorrectly, or if the wrong appliance type or model number was selected at the start of registration. It is a setup mistake in the app, not a hardware fault.
Applies to Whirlpool connected ranges during app registration. The SAID is the Smart Appliance ID printed on a label on the appliance.
Most likely causes
| Cause | How likely | DIY-fixable? |
|---|---|---|
| SAID number mistyped | Very common | Yes — no tools |
| Wrong appliance type selected | Common | Yes — no tools |
| Wrong model number selected | Common | Yes — no tools |
What you can try yourself
- Find the SAID label on the range and read it carefully — watch for look-alike characters.
- Restart registration in the app.
- Select the correct appliance type and the exact model number.
- Enter the SAID again.
- If it still fails, call Whirlpool connected appliance support on 1-866-333-4591.
When to call a technician
- Registration fails with a verified SAID and model.
- The SAID label is missing or unreadable.
- The app reports the appliance is registered to another account.
Typical professional repair cost: No cost.
Frequently asked questions
What is a SAID number?
The Smart Appliance ID used to register a connected Whirlpool appliance. Entering it incorrectly triggers the registration error.
Why does it say Registration Error?
Either the SAID was mistyped or the wrong appliance type or model number was chosen at the beginning of registration.
Does FC E8 stop the oven working?
It is a registration message for connected features; Whirlpool's article deals only with the setup details.
Sources checked
Error meanings can vary by model. This guide was checked against the documentation above; use the manual for the model number on your own appliance when it differs.
Related Whirlpool codes
- Whirlpool Range F3 E0 F3 E0 on a Whirlpool-family range flags the oven temperature sensing circuit — Whirlpool's own description names the temperature sensor, the control, or the associated wiring. A one-minute breaker reset is the official first step.
- Whirlpool Range F3 E1 F3 E1 is the paired partner of F3 E0 on Whirlpool-family ranges: the same oven temperature sensing circuit, control, or wiring suspects, per Whirlpool's own page. A one-minute breaker reset is the official first step.
- Whirlpool Range F1 E0 F1 E0 on a Whirlpool-family range points at the oven control — Whirlpool's own page names the oven control or the associated wiring. A one-minute breaker reset is the official first step.
- Whirlpool Range F2 E0 F2 E0 on a Whirlpool-family range points at the user interface, the keypad, the control, or the wiring — the input side of the oven. Clean keys and a one-minute breaker reset first.
More: all Whirlpool range codes · all Whirlpool codes · search by symptom