Whirlpool Range PUSH — What It Means & How to Fix It
Also shown as PSH on some models.
PUSH or PSH is a prompt, not a fault: you selected an oven function but have not pressed Start, so press Start to begin.
What this code means
Whirlpool explains that the Start pad begins any oven function. If Start is not pressed within 5 seconds, PUSH or PSH appears in the display; if it is not pressed within 1 minute after pressing a keypad, the function is cancelled and the time of day is shown.
Whether the display reads PUSH or PSH depends on how many characters it has.
Most likely causes
| Cause | How likely | DIY-fixable? |
|---|---|---|
| A function or temperature was entered but Start was not pressed | Very common | Yes — no tools |
What you can try yourself
- Press Start.
- If the display has already gone back to the time of day, select the function again.
- Press Start within a few seconds this time.
When to call a technician
- Pressing Start does nothing.
- PUSH appears when no function was selected.
- The oven will not begin any cycle.
Typical professional repair cost: Nothing. If the Start key itself has failed, a keypad repair runs about $200–$450.
Frequently asked questions
What does PSH mean on a Whirlpool oven?
It is short for PUSH — a reminder to press Start.
How long do I have to press Start?
PUSH appears after 5 seconds; after 1 minute the function is cancelled.
Why did my oven not turn on?
If Start was never pressed, the selection was cancelled and the display went back to the clock.
Sources checked
Error meanings can vary by model. This guide was checked against the documentation above; use the manual for the model number on your own appliance when it differs.
Related Whirlpool codes
- Whirlpool Range F3 E0 F3 E0 on a Whirlpool-family range flags the oven temperature sensing circuit — Whirlpool's own description names the temperature sensor, the control, or the associated wiring. A one-minute breaker reset is the official first step.
- Whirlpool Range F3 E1 F3 E1 is the paired partner of F3 E0 on Whirlpool-family ranges: the same oven temperature sensing circuit, control, or wiring suspects, per Whirlpool's own page. A one-minute breaker reset is the official first step.
- Whirlpool Range F1 E0 F1 E0 on a Whirlpool-family range points at the oven control — Whirlpool's own page names the oven control or the associated wiring. A one-minute breaker reset is the official first step.
- Whirlpool Range F2 E0 F2 E0 on a Whirlpool-family range points at the user interface, the keypad, the control, or the wiring — the input side of the oven. Clean keys and a one-minute breaker reset first.
More: all Whirlpool range codes · all Whirlpool codes · search by symptom