Whirlpool Washer Dryer Combo F0E1 — What It Means & How to Fix It
Also shown as F0 E1 on some models.
F0E1 means you started a Clean Washer cycle and the machine detects items still inside — remove the load and restart the cycle.
What this code means
Whirlpool says F0E1 indicates you are trying to run a Clean Washer cycle and the washer is detecting items still in the washer/dryer. Remove the load and restart Clean Washer with affresh.
Whirlpool all-in-one (ventless) washer dryers.
Most likely causes
| Cause | How likely | DIY-fixable? |
|---|---|---|
| Laundry left in the drum | Very common | Yes — no tools |
| Clean Washer chosen by mistake | Common | Yes — no tools |
| Load sensing fault when empty | Less common | No — technician job |
What you can try yourself
- Empty the drum completely, checking the door seal folds.
- Close the door.
- Restart Clean Washer.
- If it shows when empty, unplug for 5 minutes and retry.
When to call a technician
- F0E1 with an empty drum.
- Returns after a reset.
- Drum hard to turn by hand.
Typical professional repair cost: Free.
Frequently asked questions
What does F0E1 mean on a Whirlpool all-in-one?
Items were detected while trying to run Clean Washer.
Can I clean with clothes inside?
No — the cycle is for an empty drum.
What cleaner does Whirlpool suggest?
affresh washing machine cleaner.
Sources checked
Error meanings can vary by model. This guide was checked against the documentation above; use the manual for the model number on your own appliance when it differs.
Related Whirlpool codes
- Whirlpool Washer Dryer Combo F0E2 F0E2 means excessive suds were detected and the machine is running a suds reduction routine — let it finish, then switch to measured HE detergent and run a Clean Washer cycle.
- Whirlpool Washer Dryer Combo F0E3 F0E3 means temperatures inside the machine got too hot during the dry cycle — check you are using the right cycle for the fabric, then unplug for 5 minutes to reset.
- Whirlpool Washer Dryer Combo F0E4 F0E4 means the wash water is too hot, usually because the machine is connected to the hot supply — it must be connected to cold water only.
- Whirlpool Washer Dryer Combo F0E5 F0E5 means an off-balance load was detected — the load is too large or uneven, so reduce or rearrange it and avoid washing single items.
More: all Whirlpool washer dryer combo codes · all Whirlpool codes · search by symptom