Comfee Washer Error Codes — Complete List

Comfee is one of Midea's compact-appliance brands, and its portable and small top-load washers flag problems with short E-codes — E1 for filling, E2 for an open lid, E3 for an unbalanced load, E4 for draining. Each verified guide below is written for these small machines, where the faucet adapter and drain-hose position do most of the work.

• E1 Your Comfee washer isn't filling — E1 is the water-inlet fault, usually a faucet adapter that's loose or half-open, a kinked hose, or a clogged inlet screen.
• E2 Your Comfee washer thinks the top lid is open — E2 is the lid code, and the fix the manual gives is simply to close the lid.
• E3 Your Comfee washer can't balance the load for spin — E3 is the out-of-balance fault, fixed by spreading the laundry evenly and levelling the machine.
• E4 Your Comfee washer can't pump out the water — E4 is the drain fault, usually a kinked drain hose, a hose draped too high, or a clogged filter.
• E5 Your Comfee washer shows E5 when the water has filled past its preset level — turn off the faucet, and call the service center as the manual directs.

Don't see your code?

Comfee shares Midea's washer electronics, so these codes behave like the Midea set, but model ranges vary. If your display shows a code that isn't listed here, check the manual for your model number before assuming what it means.

Also from Comfee: Comfee dishwasher error codes